Blaster Parts
Showing all 948 results
-
1-1/2″ ID 2-Ply Water Discharge Hose
Read moreFast View -
1-1/2″ ID Flex 4-Ply Blast Hose
Read moreFast View -
1-1/2″ Moisture Separator
Read moreFast View -
1-1/2″ x 100′ Rubber Water S/D Hose
Read more4450-0150-100 – Rubber Water Suction Hose, 1-1/2″ ID, 100′ Section
Fast View -
1-1/4″ Air Hose, Steel Braided, 50′ Coupled
Read moreFast View -
1-1/4″ Air Valve (No Bleed)
Read more#29 SHOWN IN FIGURE
Empire 517052 – Automatic Air Valve, 1-1/4” NPT, No Bleed
Fast View -
1-1/4″ Air Valve Bleed
Read moreFast View -
1-1/4″ AL Adapter x F NPT
Read moreFast View -
1-1/4″ AL Coupler F NPT
Read moreFast View -
1-1/4″ Brass Pot End
Read moreFast View -
1-1/4″ ID Band Clamp
Read moreFast View -
1-1/4″ Long Shank Brass
Read moreFast View -
1-1/4″ Plug
Read moreFast View -
1-1/4″ Red Air Hose, 25′ Coupled
Read moreFast View -
1-1/4″ Tee
Read moreFast View -
1.5 HP Motor
Read moreFast View -
1″ Air Valve
Read moreFast View -
1″ Ball Valve Handle
Read moreFast View -
1″ Black Single Wire Hose
Read moreFast View -
1″ ID 4 Ply Blast Hose 200′ Section
Read more4314-0100-200 – Sandblast Hose, 4-Ply, Black, 150 PSI, 1″ ID, 200′ Section
Fast View -
1″ Inlet Valve
Read moreFast View -
1″ Long Shank Brass
Read moreFast View -
1″ Nozzle Holder Alum.
Read moreFast View -
1″ Red Air / Water Hose 200 PSI
Read moreFast View -
1″ Regulator
Read moreFast View -
1″ Safety Cable
Read moreFast View -
1″ x 1-1/2″ Supa Hose Coupled 50′
Read moreClemco 23480 – Supa Blast Hose, 1″ ID x 1-1/2″ OD, Coupled, 50′ Section
Fast View -
1″ x 100′ Rubber Water Hose
Read moreFast View -
1/2″ Black Close Nipple for Cyclo Part 112
Read moreFast View -
1/2″ Diaphragm, Outlet Valve
Read moreFast View -
1/2″ Hose Clamp for AM1 Coupling
Read moreFast View -
1/2″ Inlet Valve
Read moreFast View -
1/2″ M x 1/4″ M Fitting, Nipple, Reducing
Read moreFast View -
1/2″ NPT x 3/8″ Nylon Hose Barb
Read moreFast View -
1/2″ Regulator Pilot Operated
Read more#2 SHOWN IN FIGURE
Clemco 11345 – Regulator, 1/2″ Pilot-Operated Pressure
Fast View -
1/4″ FNPT Plug Connector
Read moreFast View -
10″ Air Mover w/ Polyurethane Horn
Read moreTexas Pneumatic Tools TX10AM-P – 10″ Venturi Air Mover with Polyurethane Horn
Fast View -
120-V AC Blast Light 100′
Read moreClemco 27743
The Clemco Beacon blast light is a powerful 860 – lumen LED light source to illuminate the work surface. The Clemco Beacon blast light provides illumination of the work area to improve the visibility of the blast surface for the blast operator and enhance productivity. It is ideal for poorly – lit areas or where natural light is absent.
Fast View -
1405-04-02 Dixon Fitting
Read moreFast View -
15024 1″ x 180′ PAINTER’S MATE Green Mask
Read moreFast View -
15036 1-1/2″ x 180′ PAINTER’S MATE Green
Read moreFast View -
15048 2″ x 180′ PAINTER’S MATE Green Mask
Read moreFast View -
2 Bolt Clamp, 1/2″
Read moreFast View -
2 Bolt Clamp, 3/4″
Read moreFast View -
2 Wire Electric Cord
Read moreFast View -
2-Ply, 3/4″ Blast Hose
Read moreFast View -
2″ Airline w/ Couplings
Read moreFast View -
2″ AL Adapter x F NPT
Read moreFast View -
2″ Aluminum Pot End
Read moreFast View -
2″ C AL Coupler x Shank
Read moreFast View -
2″ ID x 50′ Wire Braid Air Hose w/ King Fittings
Read moreAR60-200 – Wire Braid Air Hose w/ King Fittings, 2″ ID x 2.6″ OD, 600 Max PSI, 50′ Sections
Fast View -
25′ Air Supply Hose C/W Quick Disconnect Fittings
Read moreFast View -
2D1F-B Dixon Fitting
Read moreFast View -
2DF2-B Dixon Fitting
Read moreFast View -
3-Outlet 90° Angle Nozzle, 3/8″ Orifice
Read moreKennametal 1909063 – Tungsten Carbide 90° Angle Nozzle, Triple Outlet, 3/8″ Bore Diameter
Fast View -
3-Outlet 90° Angle Nozzle, 5/16″ Orifice
Read moreKennametal 1909053 – Tungsten Carbide 90° Angle Nozzle, Triple Outlet, 3/8″ Bore Diameter, NPT Thread
Fast View -
3-Way Chicago Connector
Read moreFast View -
3″ 1-FNPT 1-Welded Coupling Painted
Read moreAxxiom 2011-011P – Eductor Pump Muffler Assembly 3″ , Painted, 1-FNPT 1-Welded Coupling
Fast View -
3″ AL Adapter x F NPT
Read moreFast View -
3″ AL Adapter x Shank
Read moreFast View -
3″ Cam Lock Gasket
Read moreFast View -
3″C AL Coupler x Shank
Read moreFast View -
3″x 4″ C AL Cplr x Shank
Read moreFast View -
3/4″ 4-Ply Blast Hose
Read moreFast View -
3/4″ Long Shank Brass
Read moreFast View -
3/4″ Supa Hose Uncoupled 50′ Section
Read moreClemco 23102 – Supa Blast Hose, 3/4″ ID x 1-5/16” OD, 50′ Section
Fast View -
3/4″ x 500′ Reel Air Hose – Goodyear
Read moreFast View -
3/8 NPT Filter
Read moreFast View -
3/8″ ID Air Hose 300 PSI
Read moreFast View -
3/8″ M x 3/8″ Plug, Quick Connect, Plated
Read moreFast View -
3/8″ NPT F Plug Quick Disconnect
Read moreFast View -
3/8″ Single Outlet Regulator
Read moreFast View -
3/8″ x 50′ Breathing Air Hose 250 PSI Max
Read moreBA12-038 – Non-Toxic PVC Breathing Air Hose, 3/8″ ID, 50′ Section, 250 Max PSI
Fast View -
3/8″ x 50′ Red Air Line
Read moreFast View -
3/8″ x 50′, 300 PSI Air Hose
Read moreFast View -
35 Watt Bulb
Read moreFast View -
38″ Length Nylon Cape (Tan)
Read moreFast View -
38″ Nylon Respirator Cape XL
Read moreFast View -
3M 501 Prefilter Retainers – 20/BOX
Read moreFast View -
3M 6900 LG Full Face Respirator Size Large 6000 Series
Read moreThe 3M Full Facepiece Reusable Respirator 6000 Series helps provide protection against certain airborne contaminants. Versatile‚¬use with 3M particulate filters, gas/vapor cartridges and supplied air respirator systems. The 3M Cool Flow Valve helps make breathing easier. These features combine to make a comfortable, practical and economical solution. Recommended applications include assembly , chemical clean-up, chemical handling, chemical splash, chipping, chiseling, cleaning, furnace operations, grinding, laboratories, machining, masonry, painting, pouring/casting, sanding, sawing, and welding. Industries in which this facepiece are commonly used include agriculture, construction, general manufacturing, pharmaceuticals, and primary metals.
Fast View -
4 Bolt Clamp, 1″
Read moreFast View -
4 Bolt Clamp, 3-13/16″ to 4-3/16″
Read moreFast View -
4″ AL Adapter x F NPT
Read moreFast View -
4″ Clamp for Suction Hose
Read moreFast View -
4″ Dust Cap Cam Lock Aluminum
Read moreFast View -
4″ ID Material Suction Hose
Read moreFast View -
4″ ID x 1/4″ TU Material Handling Hose
Read moreMH30-400C – Black Dry Material Hose, 4″ ID, 1/4 Tube Gauge, 100 Max PSI
Fast View -
4″ x 6″ Handway Gasket
Read moreFast View -
41P2 Regulator and Gauge Assembly
Read moreFast View -
5/16″ Boron Nozzle
Read moreFast View -
5/16″ Tungsten Carbide
Read moreFast View -
5/16″ Wide Mouth Clips Pear Shaped
Read moreFast View -
50 Ft. Cord
Read moreFast View -
50′ Air Supply Hose C/W Quick Disconnect Fittings
Read moreFast View -
6′ Web Pass Through Anchor Sling w/ 2 D-Rings
Read moreFalltech 7372 – 6′ Web Pass-through Anchor Sling with 2 D-Rings and Wear Pad
Fast View -
6″ Flex Hose
Read moreFast View -
6″ Skirted Pop Up Gasket
Read moreFast View -
60″ Wide x 60″ Deep x 53″ High, 900 Reclaim & D20 DC
Read moreFast View -
6LED Blast Lgt, Poly Wrap Alum, No-Air, 100ft Cable, Power Box & Cord Plug Includes 3112HC-LED Stanc
Read more6LED Blast Lgt, Poly Wrap Alum, No-Air, 100ft Cable, Power Box & Cord Plug Includes 3112HC-LED StancWestern Technology 6 LED Blast Light, Polyurethane-Wrapped Aluminum, No-Air, 100Ft Cable, Power Box, and Cord Plug Includes 3112HC-LED Stanchion
Fast View -
7″ Flex Hose
Read moreFast View -
8″ Flex Suction Hose
Read moreFast View -
90 Degree Nozzle, 5/16″ Bore, 1-1/4 Brass Thread
Read moreFast View -
90 Degree Street Elbow, 1″
Read more#14 SHOWN IN FIGURE
Clemco 01775 – 90 Degree Street Elbow, 1″
Replacement elbow for 6 cu. ft. blast pot muffler
Fast View -
Abrasive Trap Cap Lock Bar
Read moreFast View -
Abrasive Trap Screen, 1″
Read moreFast View -
Abrasive Trap, 1″
Read moreFast View -
Acetate Inner Lens, 25/PK
Read moreFast View -
ACV Air Control Valve w/ Belt
Read moreFast View -
Adapter, Brass, 1/4″ x 1/4″
Read moreFast View -
Adapter, NA-2
Read moreFast View -
Adapter, NA-3 Nozzle
Read moreFast View -
Adapter, Nozzle (for P190 & BBO)
Read more#2 SHOWN IN FIGURE
Empire 504901 – P-190 Suction Blast Gun Nozzle Adapter
Fast View -
Adaptor, 1/8″ NPT w/ 1/16″ Orif
Read moreFast View -
Adaptor, Hose End
Read moreFast View -
Adhesive-Backed Mylar Lens Cover 25/PK
Read moreFast View -
Adhesive-Edged Mylar Lens, 25/PK
Read moreFast View -
Adjustable Flow Control Valve
Read moreFast View -
Adjustable Head Support for Nova 3
Read moreFast View -
Adjustable Headband Suspension
Read moreFast View -
Adjustable Pinlock Headband Suspension
Read moreFast View -
Air Driven Water Pump
Read moreFast View -
Air Filter (MS), 1-1/2″ MD (SMC)
Read moreFast View -
Air Filter (MS), 1″ MD (SMC)
Read moreFast View -
Air Filter (MS), 1/2″ Manual Drain
Read moreFast View -
Air Filter (S) Filter Element, 1-1/2″ AD/MD
Read moreFast View -
Air Filter (W) Element, 1″ & 1-1/2″
Read moreFast View -
Air Filter 1/2″
Read moreFast View -
Air Gasket, 2 Lug
Read moreFast View -
Air Hose 3/4″ or 1″ ID – 50 ft.
Read moreFast View -
Air Hose Coupling 4-Lug 1-1/4″
Read moreFast View -
Air Hose, 1/4″
Read moreFast View -
Air Jet 3/32″ (for P190 & BBO)
Read moreFast View -
Air Jet, 1/8″ MH-2
Read moreFast View -
Air Jet, 3/32″ MH-2
Read moreFast View -
Air Manifold 2.5 Gal
Read moreTexas Pneumatic Tools TX-3AMF – Four Outlet Air Manifold, 2.5 Gallon, 1/2″ Outlet Size
Fast View -
Air Manifold, 15 Gal ASME Tank
Read moreIncludes:
2″ – 4 Prong (Bull Hose) Inlet Coupling
8 outlets w/ 3/4″ Ball Valves & Crow Foot Couplings
200 psi Pressure Relief Valve
Drain Valve on Bottom of Tank
Pressure Gage w/ Plastic Cover
Units can be linked together by replacing the square plug with a hose coupling.
Fast View -
Air Motor 250/400/750 Radiator w/ Drain Holes
Read moreFast View -
Air Spinner
Read moreFast View -
Air Systems Four Outlet Breather Box
Read moreThe Air Systems Breather Box is a portable Grade-D filtration system designed to provide breathing air for workers.
Fast View -
Air Valve Repair Kit 1-1/2″ & 2″ High Flow
Read moreAxxiom 2123-009-99 – Auto Air Valve Replacement Kit 1-1/2″(high flow) & 2″
Fast View -
Airbag Tarp – 20′ x 100′ Silicone Coated Nylon
Read moreEagle Industries 20100 – Silicone Coated Nylon Airbag Tarp, 20′ x 100′
Eagle Industries Product Information
https://www.eagleind.com/wp-content/uploads/2020/01/Coated-Airbag-NEW.pdf
Fast View -
Airline Filter Replacement Cartridge
Read moreReplacement Filter Cartridge – FITS INTO NOVA AND BULLARD UNITS
Fast View -
Apollo 60 HP
Read moreFast View -
Apollo 600 w/ DLX, Cool Air & Hose
Read moreClemco 24211 – Apollo 600 HP w/ 50 ft. Respirator Hose & Cool-Air Tube
Fast View -
Apollo 600 w/Constant Flow DLX
Read moreClemco 25190 – Apollo 600 HP DLX Less Respirator Hose with Constant Flow Connector
Fast View -
Apollo 600HP DLX w/ACV
Read moreFast View -
APV 1-1/4″ w/ Urethane Sleeve
Read more888-2149-107PB -APV Abrasive Metering Valve, 1-1/4″ Piping w/ Urethane Sleeve
Fast View -
Auto Air Valve 1-1/4″ NPT
Read moreFast View -
Auto Air Valve Diaphram
Read moreFast View -
Auto Air Valve, N/C 1″
Read moreFast View -
Auto Drain
Read moreFast View -
B2L4-H Nozzle, 1/8″ Bore
Read moreKennametal 1506024 – Boron Carbide Cone Straight Bore Nozzle, 1/8″ Bore Diameter, 4″ Length
Fast View -
B3L4-H Nozzle, 3/16″ Bore
Read moreKennametal 1506034 – Boron Carbide Cone Straight Bore Nozzle, 3/16″ Bore Diameter, 4″ Length
Fast View -
B4L4-H Nozzle, 1/4″ Bore
Read moreKennametal 1506044 – Boron Carbide Cone Straight Bore Nozzle, 1/4″ Bore Diameter, 4″ Length
Fast View -
Ball Valve 1″ Full Port
Read moreFast View -
Ball Valve 1/4″
Read moreFast View -
Banana Nozzle 10 mm
Read moreFast View -
Barricade Tape, Danger (Red) 3″ x 1000′
Read moreFast View -
Battery Box
Read moreFast View -
Belt w/ Buckles
Read moreFast View -
Big Clem Gasket, Manway
Read moreFast View -
Black Flex Blast Hose 1″
Read moreFast View -
Black Max Clamp – 20″ Bridge
Read moreFast View -
Blast Hose 1-1/4″, 100′
Read moreFast View -
Blast Hose 1″ ID x 1-7/8″ OD
Read moreFast View -
Blast Hose 50 ft.
Read moreFast View -
Blast Hose, 2-BR 1-1/4″ ID x 50′
Read moreClemco 23756 – 2-Braid Blast Hose, 1-1/4″ ID x 2-3/32” OD, 50 FT Section
Fast View -
Blast Hose, 4-PLY 3/4″ ID x 100′
Read moreFast View -
Blast Light Inner Retainers
Read moreFast View -
Blast Light Outer Retainers
Read moreFast View -
Blast Light Replacement Bulbs
Read moreFast View -
Blast Light Socket
Read moreFast View -
Blast Nozzle No. 5
Read moreFast View -
Blast Suit – Blue 3XL
Read moreFast View -
Blast Suit, Blue – Large
Read moreFast View -
Blast Suit, Large
Read moreFast View -
Blast Suit, Large
Read moreThe Clemco heavy-duty blast suit and gauntlet-style leather gloves protect the blast operator from the impact of rebounding abrasive. Heavy cotton fabric on back of suit allows air to circulate, while fronts of arms and legs are protected by leather panels. Straps at cuffs adjust to fit, keeping out dust and abrasive. The red color stands out in a blast environment. It is lighter in weight than all-leather or all-rubber suits.
Fast View -
Blast Suit, Lightweight – 4XL
Read moreFast View -
Blast Suit, Small
Read moreFast View -
Blowdown Hose Assy 3/4″ x 18″
Read moreFast View -
Body, Pinch Tube Valve
Read moreFast View -
Bolt, 1/2″-13 x 1-3/4″ LG, Hex Head Cap
Read more#11 SHOWN IN FIGURE
Empire 551962 – Bolt, 1/2” – 13 x 1-3/4”
Fast View -
Boron Carbide Nozzle, 1/4″
Read moreKennametal B1505042 – Boron Carbide Straight Bore Nozzle 1/4″ Bore Diameter
Fast View -
Bottom Cap, 1-1/2″ Inlet Valve
Read more#5 SHOWN IN FIGURE
Clemco 02001 – 1-1/2″ Inlet Valve Replacement Bottom Cap
Fast View -
Bottom Potentiometer
Read moreFast View -
BP200 SiAION XL Performance Nozzle 1-1/4″ Entry, Aluminum Thread 1/2″
Read moreXL Performance Nozzle – BP200 SiAION
Kennametal Product Brochure
Fast View -
Brass Coupling, CF 1-1/4″
Read moreFast View -
Breathing Tube
Read moreFast View -
Breathing Tube
Read moreFast View -
BRS 3.5 Cyclone Door
Read moreFast View -
BRS Dry-Filter 10″ Paper Media
Read moreFast View -
BRS Model 6.5 Package PBPV 12 VDC Portable
Read moreThe Schmidt® BRS can blast and vacuum simultaneously, effectively eliminating offensive dust clouds, poor visibility and costly cleanup. It can also perform either function independently. The portable system is ideally suited for jobs where traditional open-air blasting is prohibited, or is not possible or practical.
Fast View -
BRS Vacuum Workhead Complete
Read moreFast View -
BRS Vacuum Workhead Outside Corner Brush Set 3″ Style I & II
Read moreFast View -
BSD-4 Long Venturi Nozzle
Read moreClemco 01419 – Long Venturi Nozzle, Boron Carbide, Metal Jacket, 1/4″ Orifice
Fast View -
BSD-5 Long Venturi Nozzle
Read moreClemco 01420 – Long Venturi Nozzle, Boron Carbide, Metal Jacket, 5/16″ Orifice
Fast View -
BSD-6 Long Venturi Nozzle
Read moreClemco 01421 – Long Venturi Nozzle, Boron Carbide, Metal Jacket, 3/8″ Orifice
Fast View -
Buccaneer 3 Wire Plug
Read moreFast View -
Buccaneer 3 Wire Socket
Read moreFast View -
Bullard CAB, 10PPM CO Monitor for High Pressure
Read moreBullard COHP CO Monitor includes lights, connection kit, an alarm and uses 9V battery or 110 VAC power for activation.
Fast View -
Bundle Supreme 3/4″ ID Blast Hose
Read moreFast View -
Bushing 1 -1/2″ x 1 (150X100)
Read moreFast View -
Bushing, 3/4″ x 1/2″, P-105
Read moreFast View -
Button Bumper 25/PK
Read moreFast View -
C1-1 Ceramic Nozzle, 3/32″ Bore
Read moreKennametal 1213010- Long Tapered Cone Nozzle, Straight Bore, 3/32″ Bore Diameter
Fast View -
C1-2 Ceramic Nozzle, 1/8″ Bore
Read moreKennametal 1213020- Long Tapered Cone Nozzle, Straight Bore, 1/8″ Bore Diameter
Fast View -
C1-2-1/2 Ceramic Nozzle, 5/32″ Bore
Read moreKennametal 1213025 – Long Tapered Cone Nozzle, Straight Bore, 5/32″ Bore Diameter
Fast View -
C1-3 Ceramic Nozzle, 3/16″ Bore
Read moreKennametal 1213030- Long Tapered Cone Nozzle, Straight Bore, 3/16″ Bore Diameter
Fast View -
C1-4 Ceramic Nozzle, 1/4″ Bore
Read moreKennametal 1213040- Long Tapered Cone Nozzle, Straight Bore, 1/4″ Bore Diameter
Fast View -
C1-5 Ceramic Nozzle, 5/16″ Bore
Read moreKennametal 1213050- Long Tapered Cone Nozzle, Straight Bore, 5/16″ Bore Diameter
Fast View -
C1-6 Ceramic Nozzle, 3/8″ Bore
Read moreKennametal 1213060- Long Tapered Cone Nozzle, Straight Bore, 3/8″ Bore Diameter
Fast View -
C2-1 Ceramic Nozzle 3/32″ Bore
Read moreKennametal 1214010 – C2-1 Long Tapered Cone Nozzle, 3/32″ Bore Diameter, Straight Bore
Fast View -
C2-1-1/2 Ceramic Nozzle, 7/64″ Bore
Read moreKennametal 1214015 – C2-1-1/2 , Medium Tapered Ceramic Cone Nozzle, 7/64″ Bore Diameter
Fast View -
C2-2 Ceramic Nozzle,1/8″ Bore
Read moreKennametal 1214020 – C2-2, Medium Tapered Ceramic Cone Nozzle, 1/8″ Bore Diameter
Fast View -
C2-2-1/2 Ceramic Nozzle, 5/32″ Bore
Read moreKennametal 1214025 – C2-2-1/2, Medium Tapered Ceramic Cone Nozzle, 5/32″ Bore Diameter
Fast View -
C40 Respirator Climate Control Cool & Heat
Read moreRPB Safety Climate Control Device – Control the supplied air to suit by cooling incoming air by up to 52˚F (29˚C) or heating it by up to 33˚F (18˚C).
Fast View -
CAB (Bullard) CO Filtration Monitor
Read moreFast View -
CAB Filter Element A- Particulate 15- 15 or 30 CFM
Read moreFast View -
CAB Filter Element B – Coalescing 15/30CFM
Read moreFast View -
CAB Filter Stage 1 – 50 CFM
Read moreFast View -
Cabinet Gloves Pair
Read moreFast View -
Cabinet Light Tube, LED
Read moreFast View -
Caliber Connector Assembly, CMS-2
Read moreFast View -
Calipso Ambient Air Pump w/ TEFC Motor
Read moreThe Clemco Calipso Ambient Air Pump, is a cost-effective alternative to a breathing-air compressor. It provides an oil-free air supply for low-pressure, type CE, supplied-air respirators used for abrasive blasting or for any NIOSH approved continuous flow hood or helmet-style respirator approved to operate with 8 cfm at 10 PSI or less.
Fast View -
Cape Attachment Strap
Read moreFast View -
Cape Inner Collar Clemco Style
Read moreFast View -
Cape, APL 60 Helmet
Read moreFast View -
CAT Cool End Venturi Kit
Read moreFast View -
CAT Cool-Air Tube w/ Belt
Read more
Clemco Cool Air Tube (CAT) allows the blast operator to control the temperature and volume of air to a Clemco high-pressure Type CE continuous flow supplied-air respirator within a preset range and to cool the air by as much as 50 F.Fast View -
CAT Knob
Read moreFast View -
CAT Seal Kit
Read moreFast View -
CAT Valve Insert
Read moreFast View -
CAT/CCT Spacer #1, Narrow
Read moreFast View -
CAT/CCT Venturi Tube
Read moreFast View -
CAT/CCT Vortex Tube
Read moreFast View -
CB-6 Small Cone Nozzle
Read moreFast View -
CCAC ClemCool Air Con w/ Belt
Read moreBelt-mounted, adjustable valve — cools breathing air for use with Clemco Apollo HP respirator models. Allows operator to adjust flow and temperature of incoming air. Clem-Cool also can be used as the source of cool air for Clemco Comfort Vest.
Fast View -
CCT Climate Control w/ Belt
Read moreThe Clemco Climate Control Tube (CCT) allows the blast operator to cool or warm the incoming compressed air to a Clemco high-pressure Type CE continuous flow supplied-air respirator.
Fast View -
Ceramic Cone Nozzle Holder
Read moreFast View -
Ceramic Nozzle, 1/4″ Bore
Read moreFast View -
Ceramic Nozzle, 1/4″ Bore, MH-2
Read moreFast View -
Ceramic Nozzle, 3/16″ Bore
Read moreFast View -
Ceramic Nozzle, CN3-3
Read moreFast View -
CFC Constant Flow Conn, HP
Read moreFast View -
CFP-6C w/ NPL
Read moreFast View -
CJD-4 Nozzle
Read moreFast View -
CL166-5 Ceramic Nozzle, 5/16″ Bore
Read moreFast View -
CL198-4 Ceramic Nozzle, 1/4″ Bore
Read moreFast View -
CL198-6 Ceramic Nozzle, 3/8″ Bore
Read moreFast View -
Clamp
Read moreFast View -
Clamp
Read moreFast View -
Clamp 1/4″
Read moreFast View -
Clamp, Air Hose
Read moreFast View -
Clamp, Hose 9″
Read moreFast View -
Clamp, Hose, Heavy Duty, 6″
Read moreFast View -
Clamp, Material Hose
Read more#19 SHOWN IN FIGURE
Power Gun Suction Blast Gun Assembly
Clemco 24780 – Material Hose Clamp
Fast View -
Cleanout Plug
Read moreFast View -
Climate Control Tube Assembly C/W BSP Thread
Read moreRPB Safety Cool Air Tube Assembly cools compressed breathing air coming into respirators by as much as 32 ºF(18 ºC). The 4000-01 Cold Air Tube helps maximize worker comfort and increase productivity in hot climates. The 4000-01 Cold Air Tube Assembly™ is fitted with an airflow regulator that allows the user to adjust the outgoing air temperature to suit their requirements.
Fast View -
Close Nipple 1-1/2″
Read moreFast View -
Closure O-Ring, 10″
Read moreFast View -
CMS-2 Cont CO Monitor Pkg
Read moreClemco 22894 – CMS-2 Cont CO Monitor Package
Carbon monoxide monitor and alarm for breathing air supplied from a compressed air source. Features warning light, high-decibel audible alarm, particulate/oil filter, and connections for optional remote alarm and shutdown devices.
Fast View -
CMS-4 CO Monitor Package
Read moreThe CMS-4 monitor detects carbon monoxide in the breathing air supply and triggers audible, visual, and vibratory alarms when CO is detected in concentrations of at least 10 parts per million. The alarms alert the operator to an unsafe condition.
Fast View -
CO Monitor
Read moreFast View -
Cold Air Tube Body
Read moreFast View -
Combo Cap
Read moreFast View -
Combo Valve 1-1/4″
Read moreAxxiom 2223-000 – Combo Valve 1-1/4″
Axxiom Product Brochure
https://www.axxiommfg.com/library/documents/AAV_ComboValve_2021102.pdf
Fast View -
Combo Valve Spring
Read moreFast View -
Connector, 1/8″ Brass Hex
Read moreFast View -
Connector, Tube
Read moreFast View -
Constant Flow Control Connector
Read moreClemco 21429 – Constant Flow Control Connector for Low Pressure Apollo Respirators
Fast View -
Constant Flow Control Valve
Read moreFast View -
Constant Flow Control Valve
Read moreBullard Constant Flow Control Valve w/ 1/4″ Industrial Quick-Disconnect Nipple
Fast View -
Constant Flow Respirator w/ Inner Bib
Read moreFast View -
Containment Screen – 85% Black 20′ x 20′
Read moreEagle Industries – CS-85B-2020 – Containment Screen – 85% Mesh Black, 20′ x 20′, Non-Flame Retardant
Fast View -
Control Valve – Pneumatic
Read moreFast View -
Conversion Kit
Read moreClemco 22079 – Conversion Kit, Apollo 60 and 600 convert high to low pressure for breathing air systems
Fast View -
Cool Tube Assembly
Read moreThe AC1000 is designed to supply a continuous flow of cool air to certain Bullard supplied air respirators. Please consult the NIOSH approval matrix in your respirator user manual to verify that the AC1000 is NIOSH approved for your specific configuration. All Bullard parts must be present and properly assembled to constitute a NIOSH-approved respirator.
Fast View -
Coupling 1″ Aluminum
Read moreFast View -
Coupling CFA-1/2
Read moreFast View -
Coupling Gasket
Read moreFast View -
Coupling Q3 Alum.
Read moreFast View -
Coupling, Nozzle, NC 1/2″
Read moreFast View -
Cover, 16″ Dia Blast Machine
Read moreFast View -
Cover, 24″ Dia Blast Machine
Read moreFast View -
CPF 20 Air Filter w/ Regulator
Read moreParticulate filter for breathing air supplied from a compressed air source.
Fast View -
CPF 20 Regulator Kit
Read moreFast View -
CPF 80 Air Filter, Four Outlets
Read moreFast View -
CPF Cap, Single Outlet
Read moreFast View -
CPF Filter Cartridge
Read moreFast View -
CPF Filter Cartridge Adaptor Kit
Read moreFast View -
CPF Gasket & O-Ring Kit
Read moreFast View -
CPF Gauge Kit, Single Outlet
Read moreFast View -
CPLG Crowfoot FPT 1″ Air
Read moreFast View -
CPLG Crowfoot FPT 3/4″ Global
Read moreFast View -
Cplg, CF (Brass) 1-1/4″ Thread w/ 3″ Nipple
Read moreClemco 10806 – CFP-P Threaded Quick Coupling, Brass, 1-1/4″ x 3″, for all standard blast machines with 1” or 1-1/4” piping
Fast View -
Cplg, CQA-1/2 (Alum) – 1/2″ ID
Read moreFast View -
Cplg, CQP-3 (Nylon), 1-1/4″ ID
Read moreFast View -
Cplg, CQPS-3/4 (Nylon), Supa
Read moreFast View -
CQ-1 Brass Coupling
Read moreFast View -
CQ-3 Brass Coupling
Read moreFast View -
CQA3 – Alum Coupling
Read moreFast View -
CQPS-2 Nylon Coupling
Read moreFast View -
CSD-6 Nozzle
Read moreFast View -
CSD-7 Nozzle
Read moreFast View -
CT-8 Nozzle
Read moreFast View -
CTB-2 Boron Carbide Blast Nozzle
Read moreFast View -
CTB-3 Nozzle, 3/16″ Boron Carbide
Read moreFast View -
CTB-4 Nozzle, 1/4″ Boron Carbide
Read moreFast View -
D2F1 Dixon Fitting
Read moreD2F1 – Steel Quick Disconnect 1/4″ x 1/8″, Industrial Interchange Pneumatic Nipple
Fast View -
D2F2-B Dixon Fitting
Read moreFast View -
Deadman II, Pneumatic
Read moreFast View -
Decal
Read moreFast View -
Decal
Read moreFast View -
Decal
Read moreFast View -
Decal
Read moreFast View -
Decal
Read moreFast View -
Decal Kit Bulk Unit Portable
Read moreFast View -
Decal Kit Small Pot
Read moreFast View -
Di-Carb Nozzle, 1/4″ Bore (MH-2)
Read moreFast View -
Diaphragm, Abrasive Regulator (OLD STYLE)
Read more#30 SHOWN IN FIGURE
Empire 523662- Automatic Sure-Flo Regulator Diaphragm
Fast View -
Diaphragm, Abrasive Regulator 6″ Dia
Read moreFast View -
Diaphragm, Sure-Flo Regulator
Read more#30 SHOWN IN FIGURE
Empire 525012 – Automatic Sure-Flo Regulator Replacement Diaphragm
Fast View -
Diaphram, for 1″ Cla Valve
Read moreFast View -
Dixon 1/4″ Male NPT w/ Plug
Read moreFast View -
Do-Rag
Read moreFast View -
Donut Washer
Read moreFast View -
Door Maintenance Kit
Read moreFast View -
Drum Vacuum Plate Assy
Read moreFast View -
Dry Pak Pro Duo
Read moreFast View -
Dual-Cool Assembly
Read moreBullard DC5040 – Dual-Cool Climate Control System used for Bullard Series 88VX, GenVX™, CC20, RT and GR50
Fast View -
Dust Bag, Envelope, 18-3/4″ x 20-1/2″
Read moreFast View -
Earplugs 100 PR/Box, Max-1 Corded Max NRR-33 Rated
Read moreHoward Leight Max-1 Corded Max NRR-33 Coral Bell Shape Foam Earplugs 100 PAIR/BOX
Fast View -
Earplugs 200 PR/Box, Max-1 Uncorded Max NRR-33
Read moreHoward Leight Max-1 Uncorded Max NRR-33 Coral Bell Shape Foam Earplugs 200 PAIR/BOX
Fast View -
Educt-O-Matic Complete w/ Attachments
Read moreFast View -
Eductor Nozzle 350 CFM
Read moreFast View -
Elastic Chin Strap
Read moreFast View -
Elbow 1-1/4″ 90 Degree
Read moreFast View -
Elbow Reducing 1-1/4″ x 1″
Read moreFast View -
Elbow, 1/8″ Street
Read moreFast View -
Electric Cord 16-2 Wire Bulk
Read moreFast View -
Element, Filter , 3/8″
Read moreFast View -
Empire Style 55′ Twinline
Read more200-055E – Yellow Twinline Control Hose w/ Fittings, 3/16″ ID x 55′ w/ Unions
Fast View -
End Rail & Toeboard Assembly
Read moreWide End Rail and End Toeboard Assembly for Wide Width Stages (20″ & Wider)
Fast View -
Exhaust Diaphram
Read moreFast View -
Exhaust Valve Body
Read moreFast View -
EXTN Cord w/ Connection, 110′ 16/3
Read moreFast View -
Extn Nozzle (hrdnd), 7/16″ x 9″
Read moreFast View -
FallTech Trailing Rope Grab w/ 3ft Attached Shock Lanyard
Read moreFallTech 8368 – Trailing Rope Adjuster with 3′ Energy Absorbing Lanyard
Fast View -
Fan Nozzle SN 6AP
Read moreKennametal B2616063 – Fan Nozzle
- 6-3/8″ Length
- Bore Diameter: 3/8″
- Polyurethane jacket.
- Thread style: 1-1/4 – 11-1/2 N.P.S.M
- Polyurethane threads
Fast View -
Fem 1-1/4″ Ground Joint
Read moreFast View -
Female Dixon Quick Release Fitting
Read more2FS3-B – Dixon Brass Quick Disconnect ,1/4″, Industrial Interchange Pneumatic Coupler, Standard Hose Barb – 3/8″ Hose ID
Fast View -
Filter 13″x36″
Read moreFast View -
Filter 8″
Read moreFast View -
Filter 9″x26″
Read moreFast View -
Filter Element
Read moreFast View -
Filter Kit, CAB50FE
Read moreFast View -
Filter, Air (FS203, 206, 210)
Read moreFast View -
Filter, Charcoal, CMS-3, 5/PK
Read moreReplacement charcoal filter for the Clemco CMS-3 and CMS-4 Carbon Monoxide Monitor.
Fast View -
Filter, Manual 1/4″
Read moreFast View -
Fitting Brass, 3/8″ x 1/4″ Hose
Read moreFast View -
Fitting, 1-1/4″ M-NPT / 1-1/4″ M-Flare
Read moreFast View -
Fitting, Barbed, 1″
Read moreFast View -
Fitting, Brass 1/4″x1/8″ NPT
Read moreFast View -
Fitting, Brass, 1/4″ Hose x 1/4″ Male
Read moreFast View -
Fitting, Connector for MH2 Gun
Read moreFast View -
Flange Gasket, 150# 3
Read moreFast View -
Flanged 45 Degree
Read moreFast View -
Flanged Adaptor
Read moreFast View -
Flat Head Screw
Read moreFast View -
Flathead Screw
Read moreFast View -
Flex Hose, 16″, Per Foot
Read moreFast View -
Flow Control Breaker
Read moreFast View -
Foot Pedal Air Valve
Read moreFast View -
FSV Abrasive Metering Valve
Read moreClemco 02427 – Flat Sand Valve
Flat Sand Valve (FSV) is a manually-operated media valve that comes standard on classic blast machines ranging from 2 cu. ft. to 20 cu. ft. It can be used with expendable mineral and slag abrasives, as well as plastic media. However, the FSV does not work well with metallic media.
Fast View -
FSV Disc, Stainless
Read moreFast View -
FSV Packing Gland
Read moreFast View -
FSV Rubber Gasket
Read moreFast View -
FSV Upper Body
Read moreFast View -
Full Port Hose Coupling 1-1/2″ Hose ID
Read moreQ4X – Full Port Aluminum Coupling, 1-1/2″ Hose ID x 2-3/8″ Hose OD, 1-3/4″ Gasket ID
Fast View -
Full Port Hose Coupling 1-1/4″ ID
Read moreQ3X – Full Port Aluminum Coupling, 1-1/4″ Hose ID x 2-5/32″ Hose OD, 1-3/4″ Gasket ID
Fast View -
Full Port Hose Coupling 1″ Hose ID
Read moreQ2X – Full Port Aluminum Coupling, 1″ Hose ID x 1-7/8″ Hose OD, 1-3/4″ Gasket ID
Fast View -
Full Port Hose Coupling 2″ Hose ID
Read moreQ6X – Full Port Aluminum Coupling, 2″ Hose ID x 2-7/8″ Hose OD, 1-3/4″ Gasket ID
Fast View -
Full Port Pot End 2″ Threads
Read moreFast View -
Full Port Pot End Coupling 1-1/2″ Threads
Read moreSB3X – Full Port Threaded Aluminum Coupling, 1-1/2″ NPT, 1-3/4″ Gasket ID
Fast View -
G2 Deadman Replacement Kit Pneumatic
Read moreFast View -
Gas, Test (10 ppm CO)
Read moreFast View -
Gasket 5/8″ x 2-1/2″ – PRICE PER FT
Read moreFast View -
Gasket CQGP
Read moreFast View -
Gasket CQGP-1, 10/PK
Read moreFast View -
Gasket O-Ring 16″
Read moreFast View -
Gasket, 1/8″ x 1/4″, Per Foot
Read moreFast View -
Gasket, 1/8″ x 2″ – Per Foot
Read moreFast View -
Gasket, CQG Coupling, 10/PK
Read moreFast View -
Gasket, Inspection Door
Read moreFast View -
Gasket, Inspection Door, 3″ x 4″
Read more#8 SHOWN IN FIGURE
Clemco 01249 – Inspection Door Gasket 3″ x 4″ for Clemco 1028 & 1042 Blast Machines
Fast View -
Gasket, Inspection Door, 6″ x 8″
Read moreFast View -
Gasket, MicroValve
Read moreFast View -
Gasket, Purifier Lower
Read moreFast View -
Gauge Needles 5/PK
Read moreFast View -
Gauge Unit FSV/Sntl
Read moreFast View -
Gauge, Nozzle Pressure Kit
Read moreFast View -
Gear Hose Clamps
Read moreFast View -
GenVX Cheek Pads – Set
Read moreFast View -
GenVX Inner Lens – 25/PK
Read moreFast View -
GenVX Outer Lenses – Green
Read moreFast View -
GenVX Respirator w/ AC1000
Read moreFast View -
GenVX Tinted Outer Lens – 25/PK
Read moreFast View -
Glove Set (12710 & 12711)
Read moreFast View -
Gloves 24″ x 6″
Read moreFast View -
Gloves 33″ x 7″
Read moreFast View -
Gloves w/ Gauntlet – Pair
Read moreEmpire 509891 – Sandblasting Cabinet Gloves Pair w/ Gauntlet, Neoprene, Black, 31″
Fast View -
Grit Valve Ball & Stem
Read moreFast View -
Grit Valve Ball Seat
Read moreFast View -
Grit Valve Ball Seat Gasket
Read moreFast View -
Grit Valve Diaphr, Sngl or 2 Ply
Read moreFast View -
Grit Valve Packing
Read moreFast View -
Grit Valve Stem Nut
Read moreFast View -
Grommet, Hose Inlet
Read moreFast View -
Gun Assembly, #6 BNP
Read moreFast View -
Gun Incl. Air Jet 25 CFM
Read moreFast View -
Gun, Inc. Air Jet, Less Nozzle 3/4″ ID, 25 CFM
Read moreFast View -
Gun, Long Handle, 1/4″ Ceramic Nozzle, 1/8″ Air Jet
Read moreEmpire 505521 – Long-Handle Gun, Ceramic Nozzle 1/4″
Fast View -
Gun, MH2 Long W/ 5/16″ Ceramic Nozzle
Read moreEmpire 505481 – Gun, Long Handle w/ 5/16″ Ceramic Nozzle, 5/32″ Air Jet
Fast View -
Hammerhead Assy 3/4″ x 50′
Read moreAR15-075YWUUXF050-PS – Hammerhead Hose Assembly, Yellow, 3/4″ x 50′ Section
Fast View -
Handle, Abr Meter Hvy Duty
Read more#6 SHOWN IN FIGURE
Clemco 20498 – FSV Abrasive Metering Valve Metering Handle, Heavy Duty
Fast View -
Handway Crab Assy 6″ x 8″
Read moreFast View -
Handway Gasket 6″ x 8″
Read moreFast View -
Hardware – Snaphook Clip 5/16″ Wide Mouth
Read moreZinc-Plated Snaphook Clip 5/16″ Wide Mouth, Carabiner Snap Hook
Fast View -
HB Stem Support Front Gasket
Read more#12 SHOWN IN FIGURE
Clemco 01093 – Hollo Blast Tool Stem Support Front Gasket
Fast View -
HB Stem Support Rear Gasket
Read more#13 SHOWN IN FIGURE
Clemco 01094 – Hollo Blast Tool Stem Support Rear Gasket
Fast View -
HB Washer, Brass
Read moreFast View -
HBC Wheel Bushing w/ Washer
Read moreFast View -
HBC-2 Hollo Blast Carraige for 5″-12″ ID
Read moreFast View -
Head, Suction, PH 190, BBO, MH-4
Read moreFast View -
Helmet APL 60 Cape Inner Collar
Read moreFast View -
Helmet Belt
Read moreFast View -
Helmet Breathing Tube Assembly
Read moreFast View -
Helmet Chin Strap
Read moreFast View -
Helmet Gasket, Window
Read moreFast View -
Helmet Hose, 3/8″ x 25′ EXTN
Read moreFast View -
Helmet Hose, 3/8″ x 50′ EXTN
Read moreFast View -
Helmet Suspension Assy, APL
Read moreFast View -
Helmet Window Frame Kit
Read moreFast View -
Helmet, APL 60HP, CAT
Read moreFast View -
Hex Nipple 1/4″ x 1/8″
Read moreFast View -
Hex Nipple, 1/4″ x 1/4″
Read moreFast View -
Hivernia Parka Tan Nylon 38″ w/ Sleeves
Read moreFast View -
HLSXA Explosion Proof
Read moreFast View -
Holder, CHE-1 (Alum)1-1/2″ OD
Read moreFast View -
Holder, CHE-1/2 (Alum)1-3/16″ OD
Read moreFast View -
Holder, CHE-2 (Alum), 1-7/8″ OD
Read moreFast View -
Holder, HEP-3/4 (Nylon), 1-1/4″ Thrd
Read moreClemco 99173 – HEP-3/4 Nylon Nozzle Holder, 3/4″ ID x 1-5/16″ OD, 1-1/4″ Thread
Fast View -
Holder, NHP-2 (Nylon), 1″ ID
Read moreFast View -
Holder, NHP-3 (Nylon), 1-1/4″ ID
Read moreFast View -
Holder, NHP-3/4 (Nylon), Supa
Read moreFast View -
Holding Nut 23/32″ ID, Reg Noz
Read moreFast View -
Hood Light Cord Attaching to Battery Pack
Read moreFast View -
Hose 1/2″ ID x 1-3/16 OD 50′
Read moreFast View -
Hose Clamp 2″ Vac Hose
Read moreFast View -
Hose Dual Twinline 50′
Read moreFast View -
Hose End 1-1/2″ ID Brass
Read moreFast View -
Hose End, 1/2″ Flare Push-Lok
Read moreClemco 15002 – Hose End Flare Push-Lok, 1/2″ Barb x 1/2″ Female Swivel
Fast View -
Hose End, 3/16″ Reusable
Read moreFast View -
Hose Insert 3/16″ x 1/8″ Rigid
Read moreFast View -
Hose Insert, 1/4″ Rigid
Read moreFast View -
Hose Pressure Gauge
Read moreFast View -
Hose Union, 3/16″
Read moreFast View -
Hose, 4″ Light Lined – Per Foot
Read more#1 SHOWN IN FIGURE
Clemco 12466 – Light-Lined Flex Hose, 4″ ID for 900 CFM
Fast View -
Hose, 5″ ID Flex – Per Foot
Read moreFast View -
Hose, Air 1-1/2″
Read moreFast View -
Hose, Air 3/16″ x 18″ Coupled
Read moreFast View -
Hose, Air 3/16″ x 50′ CPLD
Read moreFast View -
Hose, Dual Line, 55′ w/ Fittings
Read moreFast View -
Hose, Flex 8″ DIA
Read moreFast View -
Hose, Push-On 1/4″
Read moreFast View -
Hose, Sandblast 0.75″
Read moreFast View -
Hose, Sandblast 1.25″
Read moreFast View -
Hose, Supa Blast 1-1/4″ ID x 50′
Read moreFast View -
Hose, Supa Blast 1″ ID x 50′
Read moreFast View -
Hose, Supa Blast 3/4″ ID x 25′
Read moreFast View -
Hose, Supa Blast, 1-1/4″ ID x 50′ Cpld
Read moreClemco 23481 – Supa Blast Hose, 1-1/4″ ID x 1-7/8″ OD, Fitted w/ Coupling and Nozzle Holder, 50′ Section
Fast View -
Hose, Twinline Assy 3/16 x 27.5′
Read moreFast View -
Hose, Twinline Coupled 25′
Read moreFast View -
Hose, Twinline Coupled 3′
Read moreFast View -
Hose, Twinline Coupled 5′
Read moreFast View -
Hose, Twinline Coupled 50′
Read moreFast View -
Hot Air Tube
Read moreThe RPB® 4000-20 Hot Air Tube Assembly™ warms compressed breathing air coming into respirators by as much as 30˚F(17˚C). The 4000-20 Hot Air Tube helps to maximize worker comfort and increase productivity in cold climates. The 4000-20 Hot Air Tube Assembly™ is fitted with an airflow regulator that allows the user to adjust the outgoing air temperature to suit their requirements.
Fast View -
Hot/Cold Tube Assembly
Read moreFast View -
Housing Fan Bottom
Read moreFast View -
Housing Fan Top
Read moreFast View -
Housing Gasket
Read moreFast View -
Hozzle Nozzle, 45 Degree
Read moreKennametal B2008477 – Hozzle Angle Nozzle, 45 Degrees, 3/16″ Bore Diameter, 4″ Length
Fast View -
Hydraulic Hose 3/8″ ID x 50′
Read more#9 SHOWN IN FIGURE
Clemco 05527 – Hydraulic Hose, 3/8″ ID x 50′ Extension Hose
Fast View -
In-Line Desiccant
Read moreFast View -
Industrial Interchange Female Coupler
Read moreBullard Industrial Interchange Quick Disconnect 1/4″ NPT Female Coupler is a replacement part and accessories for Bullard supplied air respirators.
Fast View -
Inex, Air Jet, 3/16″ Orifice
Read moreFast View -
Injector Assembly
Read more#6 SHOWN IN FIGURE
Clemco 05536 – Injector Adaptor Sleeve Assembly, 1″ ID for 5540
Fast View -
Inlet Filter
Read moreFast View -
Inlet Fitting
Read moreFast View -
Inlet Fitting
Read moreFast View -
Inlet Valve 1/2″
Read moreFast View -
Inlet Valve, 1-1/2″
Read moreFast View -
Inner Bib for Cape
Read moreFast View -
Inner Brush 3″
Read moreFast View -
Inner Corner Brush 3″
Read moreFast View -
Inner Lens 10/PK
Read moreFast View -
Inner Visor Gasket
Read moreFast View -
Inside Padding for Nova 3- Large
Read moreFast View -
Inspect Plate, FSV/MPV/PVR/Sntl
Read more#18 SHOWN IN FIGURE
Clemco 02440 – FSV/MPV/PVR/SNTL Replacement Inspection Plate
Fast View -
Inspection Door Assy, 6″ x 8″
Read moreFast View -
Inspection Door Bolt
Read moreFast View -
Inspection Door Nut
Read moreFast View -
Inspection Door Washer
Read moreFast View -
Kit, Repair 1″ Regulator (Watts)
Read moreFast View -
Kit, Repair for 1-1/4″ Aquamatic Valve 1-4
Read moreEmpire 518362 – Complete Repair Kit for 1¼” Automatic Air Valve with Bleed
Fast View -
Kit, Repair, for P190 Gun
Read moreFast View -
L4 Blast Light (09-501-4)
Read moreFast View -
L4 Light
Read moreFast View -
Large Exterior O-Ring for 3600
Read moreFast View -
Large Heatless
Read moreFast View -
Latch/Handle, Door
Read moreFast View -
Leather Glove w/ Khaki Nylon Sleeve & Elastic
Read moreFast View -
Left Glove, Empire Style
Read moreFast View -
Lens, APL 60 Cover .0075″, 25/PK
Read moreFast View -
Lens, APL 60 Inner .040″, 5/PK
Read moreFast View -
Lens, WSH Outer .020″, 25/PK
Read moreFast View -
Lid 18″
Read moreFast View -
Lightweight Blast Suit, XL
Read moreRPB Safety 07-755-XL – Lightweight Nylon Blast Suit, Heavy Duty, Size X-Large
Fast View -
Liner/Side LH 1-8DEC
Read moreFast View -
Lo Profile Female
Read moreFast View -
Lo-Profile Male
Read moreFast View -
Lock Nut, 5/8″ Orifice
Read moreFast View -
Lock Pins, Coupling (25/PK)
Read moreFast View -
Lock Springs – 25/PK
Read moreFast View -
M-NPT / F-NPT Reducer
Read moreFast View -
Mac 12 Volt Solenoid Valve Repair Kit
Read moreFast View -
Main Line Pre FIlter 1/2″
Read moreFast View -
Maintenance Kit
Read moreFast View -
Male QC Plug Male Threads
Read moreFast View -
Male Spud 1-1/2″ Ground Joint
Read moreFast View -
Manometer Kit
Read moreKIT INCLUDES #3,4,5, & 6 SHOWN IN FIGURE
Clemco 12528 – Manometer Kit, Flexible U-Tube
Fast View -
ME100 Coupling
Read moreFast View -
Mechanical Knuckle for Brick Light
Read moreWestern Technology 9610 Knuckle with Mechanical Hub for Brick Light
Fast View -
Media Inlet Nipple
Read moreFast View -
Media Valve Orifice Sleeve
Read moreFast View -
Medium/Large Cooling Vest
Read moreFast View -
Metering Knob
Read moreFast View -
Metering Valve Complete, 1-1/2″ NPT Inlet
Read moreFast View -
Micro Mist Filter 1/2″
Read moreFast View -
MicroValve II 1-1/2″
Read moreFast View -
MicroValve Nipple 1-1/2″
Read moreFast View -
MicroValve Nipple 1-1/4″
Read moreFast View -
MicroValve Nipple 1″
Read moreFast View -
MicroValve Repair Kit (URETH)
Read moreAxxiom 2125-100-99 – MicroValve Urethane, Replacement Parts Kit w/ Sleeve
Fast View -
MicroValve Sleeve, Ureth
Read moreFast View -
MicroValve, Ureth 1-1/2″
Read moreFast View -
Mild Steel Nozzle 3/PK
Read moreFast View -
MILNM Plunger, Urethane Tip
Read more#1 SHOWN IN FIGURE
Clemco 22600 – Millennium Valve Replacement Urethane Tip Plunger
Fast View -
MILNM Spring, Compression
Read more#3 SHOWN IN FIGURE
Clemco 22604- Millennium Valve Replacement Compression Spring, 4″ Long
Fast View -
MILNM/QTM Screw, 5/16″ x 1.25″ Skt Hd
Read more#6 SHOWN IN FIGURE
Clemco 22611 – Millennium Valve Replacement Socket Head Screw, 5/16”-NC x 1.25″
Fast View -
Mini Heatless
Read moreFast View -
Mini WIN-2 Nozzle, 1/8″ Bore
Read moreKennametal 1912425 – Tungsten Carbide Wet Blast Nozzle, 1/8″ Bore Diameter
Fast View -
Mini WIN-3 Nozzle, 3/16″ Bore
Read moreKennametal 1912435 – Tungsten Carbide Wet Blast Nozzle, 3/16″ Bore Diameter
Fast View -
Mini WIN-4 Nozzle, 1/4″ Bore
Read moreKennametal 1912445 – Tungsten Carbide Wet Blast Nozzle, 1/4″ Bore Diameter
Fast View -
Moisture Block
Read moreFast View -
Motor, 3/4 HP DC, 1800 RPM
Read more#10 SHOWN IN FIGURE
Clemco 11903- Drive Mechanism Motor, 3/4 HP Variable Speed DC
Fast View -
Muffler Exhaust Element
Read moreFast View -
Muffler Screen
Read moreFast View -
Muffler, Blast Machine Exhaust
Read moreFast View -
Muffler, Breather, ACS, 1/8″
Read moreFast View -
MV2400 Muffler/Valve Assembly
Read moreFast View -
MV3 Kit, Seals
Read moreFast View -
MV3 Valve
Read moreAxxiom 2128-107 – MicroValve 3 Urethane 1-1/4″
Axxiom Product Brochure
https://www.axxiommfg.com/library/documents/MV3_MV2_2021093.pdf
Fast View -
MV3, Urethane 1-1/2″
Read moreAxxiom 2128-108 – MV3 Valve, 1-1/2″
The MV3® offers the proven productivity and safety advantages that Schmidt valves deliver to abrasive blasting operations through the precise metering of abrasive, along with an extended the service life, an improved cleanout port, and easy access to wear components for safe, efficient maintenance.
Axxiom Product Brochure
https://www.axxiommfg.com/library/documents/MV3_MV2_2021093.pdf
Fast View -
NECO 1/2″ Alum Coupling
Read moreFast View -
NECO 1/2″ Nozzle Holder
Read moreFast View -
Niagara Bottled Water 24/PK Case
Read moreFast View -
Nipple 1-1/4″ Close
Read moreFast View -
Nipple 1-1/4″ x 2″
Read moreFast View -
Nipple 1-1/4″ x 5-1/2″
Read more#15 SHOWN IN FIGURE
Clemco 01874 – Quantum Abrasive Metering Valve Nipple, 1-1/4″ x 5-1/2″
Fast View -
Nipple Galv. 1-1/4″ x 3″
Read moreFast View -
Nipple, 1-1/2″ Pipe x 2″ Sch 80
Read more#14 SHOWN IN FIGURE – QUANTUM METERING VALVE
Clemco 01840 – Nipple, 1-1/2″ x 2″ Heavy Wall
Fast View -
Nipple, 1-1/2″ x Close
Read moreFast View -
Nipple, 1-1/4″ Hvy Duty Pipe x 5″
Read moreFast View -
Nipple, 1-1/4″ UNPLTD COMB
Read moreFast View -
Nipple, 1-1/4″ x 5″
Read moreFast View -
Nipple, 2″ UNPLTD COMB
Read moreFast View -
Nipple, 3/8″ x 2″ Brass
Read moreFast View -
No-Air 12V 20W Aluminum Body Abrasive Blast Light w/ 10ft Electric Cable
Read moreThe 3600 HALOGEN NO-AIR ALUMINUM BLAST LIGHT is the best solution for all of your blasting needs. With a built in Light Stanchion, aluminum body and additional options available, it is a must have tool for your lighting needs.
FEATURES
- 12 volt repairable blast light made specifically for abrasive blasting
- Aluminum body
- 20 Watt halogen bulb
- Built in Light Stanchion
- Additional options available
Fast View -
Non-Conductive Hose 1″, Oil Resistant, 300 PSI WP
Read moreAR30-100 – Oil Resistant Multi-Purpose Air/Water Hose, 1″ ID, 300 Max PSI, Non-Conductive
Fast View -
Nova 3 Air Inlet Kit
Read moreFast View -
Nova 3 Cape Coverband
Read moreFast View -
Nova 3 Cape, 28″ Nylon Green
Read moreFast View -
Nova 3 Cape, 38″ Nylon Green
Read moreFast View -
Nova 3 Head Liner Kit
Read moreFast View -
Nova 3 Hood Tab Inserts 4/PK
Read moreFast View -
Nova 3 Inner Lens 10/PK
Read moreFast View -
Nova 3 Outer Lens 50/PK
Read moreFast View -
Nova 3 Replacement Pads – Medium
Read moreFast View -
Nova 3 Respirator
Read moreThe RPB Nova 3 revolutionizes the abrasive blasting experience with the world’s most comfortable blasting respirator. With breakthrough technology and comfort, the Nova 3 has been designed around the operator’s needs to advance their safety and productivity.
RPB Safety Product Brochure
https://www.gvs-rpb.com/assets/resources/RPB-Blasting-Industry-Brochure_EN.pdf
Fast View -
Nova 3 Side Padding Frames (Right & Left)
Read moreFast View -
Nova 3 Visor Hinge Lock
Read moreFast View -
Nozzle Adaptor
Read moreFast View -
Nozzle Carbide 3/4″ OD, 5/16″ ID
Read moreFast View -
Nozzle Extension #5
Read moreFast View -
Nozzle Extension #5
Read moreFast View -
Nozzle Holder, Ceramic 1-1/4″
Read moreFast View -
Nozzle Orifice Gauge
Read moreFast View -
Nozzle TC1-3, 3/16″ Straight Bore
Read moreFast View -
Nozzle Washer 10/PK
Read moreFast View -
Nozzle, #5 Boron Carbide
Read moreFast View -
Nozzle, #5 Ceramic
Read moreFast View -
Nozzle, #5 Tungsten Carbide
Read moreFast View -
Nozzle, #6 Ceramic
Read moreFast View -
Nozzle, #7 Ceramic
Read moreFast View -
Nozzle, #7 Tungsten Carbide
Read moreFast View -
Nozzle, Air Blow-Off
Read moreFast View -
Nozzle, Carbide, 3/4″ O.D. 5/16″ I.D.
Read moreFast View -
Nozzle, Ceramic 1/4″ (P-190, BBO, MH4)
Read moreFast View -
Nozzle, CSP-5, 5/16″ Orif, TC
Read moreFast View -
Nozzle, Extension #5, 3″ Long
Read moreFast View -
Nozzle, Tungsten Carbide Gun Insert
Read more1348-605 – Tungsten Carbide Nozzle Gun Insert, 5/16″ Bore, 3/4″ OD x 1-1/2″ Length
Fast View -
NPT 1-1/2″ Nylon Pot End
Read moreFast View -
NPT 1-1/2″ Pot End Brass
Read moreFast View -
NPT 1-1/2″ Pot End Brass
Read moreFast View -
NSA Wet Blast Attachment Assy
Read moreAxxiom 8020-000-02 – NSA Wet Blast Attachment Assembly, Urethane Body w/ Fittings
Fast View -
Nut, Nozzle Holding (Coated)
Read moreFast View -
Nuts
Read moreFast View -
NV2000 Cape Cover Band
Read moreFast View -
NV3 Tear Off Lens 50/PK
Read moreFast View -
O-Ring
Read moreFast View -
O-Ring 2-1/4″ OD x 1/8″ TLR300
Read moreClemco 02007 – 1-1/2″ Inlet Valve Replacement Top O-Ring, 2-1/4″ OD x 1/8″
Fast View -
O-Ring 7/16″ OD x 1/16″
Read moreFast View -
O-Ring Repair Kit, Sure-Flo
Read more#26 SHOWN IN FIGURE
Empire 561422 – Automatic Sure-Flo Regulator O-Ring Kit
Fast View -
O-Ring, 1-1/8″ ID x 1/8″
Read moreFast View -
O-Ring, 1-3/4″ OD
Read moreFast View -
O-Ring, 3/4″ OD x 3/32″
Read moreFast View -
O-Ring, 7/8″ OD x 5/8″ID
Read moreFast View -
O-Ring, Breathing Tube
Read moreFast View -
On/Off Switch, PF Cabinets
Read moreFast View -
Orifice Assembly, #4
Read moreFast View -
Orifice Assembly, #5
Read moreFast View -
Orifice Assembly, #6
Read moreFast View -
Orifice Assembly, #7
Read moreFast View -
Orifice Sleeve
Read moreFast View -
Outer Brush 3″
Read moreFast View -
Outer Corner Brush 3″
Read moreFast View -
Outer Lens -.020 – 50/PK
Read moreFast View -
Outlet Filter
Read moreFast View -
Outlet Filter Assembly O-Ring
Read moreFast View -
Outlet Filter Jar
Read moreFast View -
Outlet Valve
Read moreFast View -
Peecock – Drain
Read moreFast View -
Petcock, 1/4″ NPT
Read moreFast View -
PETG Outer Lens, 50/PK
Read moreFast View -
PETG Outer Lens, 50/PK
Read moreFast View -
Pinch Tube
Read moreFast View -
Piston/Rod Assembly, 1-1/2″ Inlet
Read more#14 SHOWN IN FIGURE
Clemco 02003 – 1-1/2″ Inlet Valve Piston & Rod Assembly
Fast View -
Piston/Rod Assembly, 1″ Inlet
Read more#13 SHOWN IN FIGURE
Clemco 01987 – Piston & Rod Assembly for 1″ Inlet Valve
Fast View -
Piston/Rod Assembly, 1″ Outlet
Read more#4 SHOWN IN FIGURE
Clemco 01976 – 1″ Piston Outlet Valve, Replacement Piston & Rod Assembly
Fast View -
Plastic Adapter, Nozzle (for MH-2 Gun)
Read moreFast View -
Plug & Spindle Guide, 1″ Outlet
Read more#5 SHOWN IN FIGURE
Clemco 01971 – 1″ Piston Outlet Valve, Replacement Plug and Spindle Guide
Fast View -
Plug, 1-1/2″ Pipe
Read moreFast View -
Plug, Brass, for Remote Control Valve
Read more#3 SHOWN IN FIGURE
Empire 520122 – Saf-Stop II Remote Control Handle
Fast View -
Plunger Seal
Read moreFast View -
Plunger Seal
Read moreFast View -
Plunger, Sealing, Coated (for 1 cu. ft. Pot)
Read moreFast View -
Plunger, Sealing, Coated, 6″
Read moreFast View -
PMB MODEL 2.0 P 1″
Read moreFast View -
Pneumatic Deadman
Read moreFast View -
Poly Cover
Read moreFast View -
Pop Up Gasket
Read moreFast View -
Pop Up Head 13 SX
Read moreFast View -
Pop Up Head w/ High Flow Stem
Read moreAxxiom 2100-010-04 – Pop Up Head w/ High Flow Stem for 3.5 and 6.5 Blast Pot
Fast View -
Pop-Up Gasket – 1 Bag
Read moreFast View -
Pop-Up Gasket 3 & 6 Bag Skirt
Read moreAxxiom 2100-011-04 – 3.5/6.5 cu. ft. Blast Pot Sure-Fit, Skirted, Pop-Up Gasket
Fast View -
Pop-Up Head w/ Stem
Read moreFast View -
Pop-Up Valve & Shaft, 5-1/2″
Read moreFast View -
Pop-Up Valve and Shaft, 1/2″
Read moreFast View -
Pop-Up Valve and Shaft, 4″
Read moreFast View -
Pop-Up Valve Seat, 4″
Read moreFast View -
Pop-Up Valve Seat, 6″ ID
Read moreFast View -
Pop-Up Valve Seat, Neop 80 Duro
Read moreFast View -
Pop-up Valve w/ External Sleeve
Read more#3 SHOWN IN FIGURE
Clemco 03699 – Blast Machine Pop-up Valve, 4″ with External Sleeve
Fast View -
Pop-Up Valve, Old Style, 10 cu. ft. Pot
Read moreFast View -
Pressure Gauge
Read moreFast View -
Pressure Gauge 0-160 PSI/BAR BTM
Read moreFast View -
Pressure Regulator
Read moreFast View -
Pressure Relief Valve
Read moreFast View -
Pro Stretch S/A Double Leg 100% Tie Off Lanyard w/ Snap Hook
Read moreProtecta 1340161 – Pro Stretch S/A Double Leg 100% Tie Off Lanyard w/ Snap Hook, 6′ Shock Absorbing
Fast View -
Punch Lock Clamp 2″
Read moreFast View -
Push Line 84″
Read moreClemco 25728 – Hose assembly (pusher line and air line) – Includes 84″ long 1-1/4”ID air hose coupled with a male fitting (item 22) on one end, Items 23 and 24 are shipped loose.
Fast View -
Push-On Hose Insert 1/4 x 1/4
Read moreFast View -
Pusher Line (Flex) Rplcmt 1-1/4″ x 28″
Read more#6 SHOWN IN FIGURE
Clemco 23674 – Blast Machine Pusher Line Replacement, 1-1/4″ ID x 28″ long (3 cuft & 6 cuft)
Fast View -
Pusher Line (Flex) Rplcmt 1-1/4″ x 31″
Read more#6 SHOWN IN FIGURE
Clemco 23675 – Blast Machine Pusher line Replacement, 1-1/4″ ID x 31″ Long (7, 10 & 20 cuft)
Fast View -
Pusher Line (RBR) Rplcmt 1″ x 21″
Read moreFast View -
Pyrex Lens, Box 12 (Yellow)
Read moreFast View -
Q. Connect DSO/AL Plug 1/4″
Read moreFast View -
QTM Gasket, Lower Flange
Read more#8 SHOWN IN FIGURE
Clemco 21322 – Auto Quantum Actuator Replacement Flange Gasket
Fast View -
QTM Thrd Outlet Flange, Grit valve
Read more#8 SHOWN IN FIGURE
Clemco 21319 – Flange, Threaded Outlet w/ Retaining Ridge
Fast View -
QTM Urethane Seat, Air Valve
Read more#7 SHOWN IN FIGURE
Clemco 21344 – AQV Auto Quantum Actuator Replacement Urethane Seat
Fast View -
QTM-K Metering Screw
Read more#10 SHOWN IN FIGURE
Clemco 22764 – Manual Quantum Abrasive Metering Valve Replacement Metering Screw
Fast View -
Quantum-K Manual Meter Valve
Read moreFast View -
Quick Connect 3/8″ F x 3/8″ Plug Plated
Read moreFast View -
Quick Connect 3/8″ F x 3/8″ Socket Brass
Read moreFast View -
Quick Coupler 1/4″ Female NPT
Read moreFast View -
Quick Coupling Aluminum 1/2″
Read moreFast View -
Quick Release Coupler, Female 3/8″
Read moreFast View -
Quick Release Tail, Male 1/4″
Read moreFast View -
Rain Cap
Read moreFast View -
Red Air/Water Hose 1-1/4″
Read moreFast View -
Regulator 1-1/4″ Non-Relieving
Read moreFast View -
Regulator, 1″ Pilot-Operated NR
Read moreFast View -
Regulator, 1/2″
Read moreFast View -
Regulator, 1/8″ Mini-Pilot
Read moreFast View -
Regulator, Replacement Kit
Read moreFast View -
Remote Cont Sys, TLR300 1-1/4″
Read moreClemco 01936 -TLR-300 Pneumatic Remote Control w/ Piston Outlet Valve, 1-1/2″ Inlet Valve
Fast View -
Remote Cont Sys, TLR300C w/ Piston OV, ACS
Read moreClemco 21153 – TLR-300-C, 1-1/4″ w/ ACS and Piston Outlet Valve
Fast View -
Repair Kit – 1-1/4″ Aquamatic w/o Bleed for 517042 1-2
Read moreEmpire 518921 – Complete Repair Kit for 1¼” Automatic Air Valve with No Bleed
Fast View -
Repair Kit – Pneumatic Deadman
Read moreFast View -
Repair Kit – TVII TC, SEALS ONLY
Read moreFast View -
Repair Kit MG-72/MG-78 Valves
Read moreFast View -
Repair Kit, Air Filter (Seals) (S) 1-1/2″
Read moreFast View -
Repair Kit, Air Filter (Seals) (S) 1″
Read moreFast View -
Repair Kit, Aquamatic Valve, 1-1/4″
Read moreEmpire 517592 – Diaphragm and Seal Kit for 1-¼” Automatic Air Valve
Fast View -
Repair Kit, Auto Air Valve 1″
Read moreFast View -
Repair Kit, MicroValve II
Read moreFast View -
Replacement Door Latch Kit
Read moreFast View -
Replacement Kit for DC-B Filter Cartridge
Read moreFast View -
Replacement Lenses, Pyrex
Read moreFast View -
Replacement Parts Kit TV-ll Carbide
Read moreFast View -
Respirator w/ 4644 Nylon Cape – 28″ length
Read moreThe Bullard 88VX Series airline respirators offer advancements in comfort and reliable respiratory protection for abrasive blasters. The 88VX Respirator is NIOSH approved as a Type C and CE Continuous Flow Class Respirator (Approval No. TC-19C-293). Package includes Hood (complete), Breathing Air Hose and Cape.
Fast View -
Respirator w/ Adjustable Flow Control Valve
Read moreBullard 88VX3240 – 88VX Respirator, 28″ Cape, w/ Adjustable Flow Control Valve
Fast View -
Retaining Ring, 1″ Heavy Duty
Read moreFast View -
Retention O-Ring for 3600 & 3400LED
Read moreFast View -
Ring Seal
Read moreFast View -
RLX Elec Remote Cntrl Handle
Read moreClemco 10840 – RLX Remote Control Handle Assembly, Electric
Control handle for remote activation and deactivation of an abrasive blast machine. Fail-to-safe system stops blasting if operator drops or loses control of the handle. For use with Clemco remote control systems only.
Fast View -
RLX Handle
Read moreFast View -
RLX Lever Lock
Read moreFast View -
RLX Rem Cont Handle Pneumatic
Read moreFast View -
RLX Rem Contr Handle Assy w/ ACS, Pneu
Read moreClemco 07625- RLX Pneumatic Remote Control Handle Assembly w/ ACS
Fast View -
Saf-Stop II Handle, Pneumatic
Read moreFast View -
Saf-Stop II Plunger Kit
Read more#1 SHOWN IN FIGURE
Empire 290224 – Saf-Stop II Plunger Assembly – including push rod, nut, spring, washer, & o-ring
Fast View -
Safety Cable, 1-1/2″ – 3″ OD
Read moreClemco 15013 – Blast Hose Safety Cable 1-1/2” to 3” OD Hose, Whip Check
Fast View -
Safety Clip
Read moreFast View -
Safety Pins Bag of 100
Read moreFast View -
SB Bearing Seal
Read moreFast View -
SB Dust Seal, Leather
Read moreFast View -
SB Rear End Plate
Read moreFast View -
SB Retainer Ring
Read moreFast View -
SB Washer, Tungsten Carbide
Read more#20 SHOWN IN FIGURE
Clemco 02616 – Spinblast Replacement Tungsten Carbide Washer
Fast View -
Screen ,18″
Read moreFast View -
Screen, 16″ Dia Machine, RCSD
Read moreFast View -
Screen, 24″ Dia Machine, RCSD
Read moreFast View -
Screw, 10-24 x 1″ Ctsk Mach
Read moreFast View -
Screw, 3/8″ x 1″ Hex head
Read moreFast View -
Screw, 3/8″ x 1″ Thumb
Read moreFast View -
Screw, 5/16″ x 1″ Hex Head
Read moreFast View -
Service Kit
Read moreFast View -
Service Kit
Read moreFast View -
Service Kit
Read moreBullard 15921 Service Kit for EDP10 Air Pumps
Including:
- Four carbon vanes.
- One BL-23611 inlet filter.
- One BL-S17101 carbofine outlet filter cartridge.
Fast View -
Service Kit, 1-1/2″ Inlet Valve
Read moreFast View -
Service Kit, 1″ Inlet Valve
Read moreFast View -
Service Kit, 1″ Outlet Valve
Read moreFast View -
Service Kit, Abrasive Trap
Read moreFast View -
Service Kit, AQV Actuator
Read moreClemco 24446 – Service Kit for AQV Auto Quantum Grit Valve (Clemco 24447)
24446 SERVICE KIT – QUANTUM ACTUATOR ASSEMBLY
1. QTY 1 Seat, urethane
2. QTY 2 Flange gasket
3. QTY 1 U-seal, 3-1/2″ ID (used only w/ alum piston)
4. QTY 1 O-ring. 1-1/2″ ID x 3/16″ nom.
5. QTY 1 Wiper, plunger
6. QTY 1 O-ring, 31/64″ ID
7. QTY 1 Roll pin, 1/8″ x 1/2″
8. QTY 1 O-ring, 1-1/2″ ID x 3/32″ nom.
9. QTY 1 Felt disc
10. QTY 1 Washer, rubber backed
11. QTY 2 Washer, 3/4 flat
NOTE: Item 8 is not required with current 21319 outlet flange with integrated retaining ridge. Used only with earlier style 22077 flange, requiring a separate 22429 Retaining Ring.
Items 10 and 11 used with AQV-H actuator only.Fast View -
Service Kit, MILNM Inlet Seals
Read more(•) SHOWN IN FIGURE
Clemco 22856- Millennium Valve Inlet Segment Seals Service Kit
Fast View -
Service Kit, MILNM Outlet Muffler
Read more(+) SHOWN IN FIGURE
Clemco 22868 – Millennium Valve Outlet Muffler Service Kit
Fast View -
Service Kit, MILNM Plunger
Read more(++) SHOWN IN FIGURE
Clemco 22898 – Millennium Valve Plunger Tip Service Kit
Fast View -
Service Kit, QTM-K Metering Segment
Read moreClemco 22854 – Quantum Metering Segment Service Kit
1. QTY 1, Flange gasket
2. QTY 1, Wiper seal
3. QTY 1, O-ring, 3/4 (OD nominal)
4. QTY 1, O-ring, 5/8 (OD nominal)
5. QTY 2, O-ring, 1-1/2” (ID nominal)
6. QTY 1, Roll pinFast View -
Service Kit, RLX Pneu Cont Handle
Read moreClemco 22859 – Repair Kit for RLX Pneumatic Control Handle Assembly (Clemco 10565)
Fast View -
SGT Air Jet, 1/8″ Orifice
Read more#5 SHOWN IN FIGURE
Clemco 02660 – Suction Gun Air Jet w/ Sleeve, 1/8″ Orifice
Fast View -
SGT Suction Body Nut
Read moreFast View -
Shock Absorbing Light Halo for 3400
Read moreFast View -
Sidewings (PAIR) -SZ Large
Read moreFast View -
Single Tower Deliquescent
Read moreFast View -
Sleeve O-Ring Mini Valve
Read moreFast View -
Sleeve, Rubber
Read moreFast View -
Slip Sheets for Pallets
Read moreFast View -
SLVE-4AP 1″ Entry, 1-1/4″ Nozzle
Read moreFast View -
Small Exterior O-Ring for 3600
Read moreFast View -
SN Blast Nozzle No. 3
Read moreFast View -
SN Blast Nozzle No. 4
Read moreFast View -
SN156-550AP Venturi Nozzle #5
Read moreKennametal 2615654 – SN156-550AP
BP200 SiAlON Long Venturi Nozzle, 50 mm Threads, 1″ Opening, 5/16″ Bore Diameter
Fast View -
SN156-650AP Venturi Nozzle #6
Read moreKennametal 2615664 – SN156-650AP
BP200 SiAlON Long Venturi Nozzle, 50 mm Threads, 1″ Opening, 3/8″ Bore Diameter
Fast View -
SN156-750AP Venturi Nozzle #7
Read moreKennametal 2615674 – SN156-750AP
BP200 SiAlON Long Venturi Nozzle, 50 mm Threads, 1″ Opening, 7/16″ Bore Diameter
Fast View -
SN156-7AP Nozzle
Read moreFast View -
SN156-850AP Venturi Nozzle #8
Read moreKennametal 2615684 – SN156-850AP
BP200 SiAlON Long Venturi Nozzle, 50 mm Threads, 1″ Opening, 1/2″ Bore Diameter
Fast View -
SN156-8AP Nozzle
Read moreFast View -
Snap Ring for 3600
Read moreFast View -
Snap Ring for Blast Light
Read moreFast View -
Sntl O-Ring, 2.234 ID
Read moreFast View -
Solenoid for RP Coils
Read moreFast View -
Spin Blast Tool 8″-36″ w/ Nozzles & Leather Seals
Read moreFast View -
SPR9600 Heavy Media Recovery System
Read moreFast View -
Spring, 7/16″ ID x 1-5/8″
Read more#10 SHOWN IN FIGURE
Clemco 01974 – Replacement Spring for 1″ Piston Outlet Valve
Fast View -
Spring, 7/8″ ID x 2-1/16″
Read moreFast View -
Spring, Compression
Read moreFast View -
Spring, for 1″ Aquamatic Air Valve
Read moreEmpire 518432 – 1″ Automatic Air Valve Spring, ½” Diameter x 17∕8” High
Fast View -
SSD-7 Nozzle
Read moreFast View -
Stnl Piston Shut off
Read moreFast View -
Straight Swival, 1/4″ M x 1/4″ F
Read moreFast View -
Strainer, Brz 1/4″ 90 Micron
Read moreFast View -
Striker Light
Read moreWestern Tech 8100 – The Striker Long Handle Work Light
Fast View -
String Reinforced Poly 10 Mil 20′ x 100′ Non FR
Read moreFast View -
Stud, Abrasive Valve
Read moreFast View -
Super Flex Breathing Tube
Read moreFast View -
Super High Flow Regulator
Read moreFast View -
Super Service Kit, MILNM
Read moreClemco 22899 – Millennium Valve Super Service Kit
Includes inlet, outlet, plunger and muffler kits
Fast View -
Switch w/ Electric Cord
Read moreFast View -
Swivel 1/4″, 90 DEG
Read moreFast View -
Swivel 1/8″, 90 DEG
Read moreFast View -
T045-5 Nozzle, 5/16″ Bore
Read moreKennametal 1904550 – Tungsten Carbide 45° Angle Nozzle, 5/16″ Bore Diameter
Fast View -
T045-6 Nozzle, 3/8″ Bore
Read moreFast View -
T106-2 Nozzle, 1/8″ Bore
Read moreKennametal 1910620 – Tungsten Carbide Straight Bore Nozzle, 1/8″ Bore Diameter
Fast View -
T106-3 Nozzle, 3/16″ Bore
Read moreKennametal 1910630 – Tungsten Carbide Straight Bore Nozzle, 3/16″ Bore Diameter
Fast View -
T106-4 Nozzle, 1/4″ Bore
Read moreKennametal 1910640 – Tungsten Carbide Straight Bore Nozzle, 1/4″ Bore Diameter
Fast View -
T106-5 Nozzle, 5/16″ Bore
Read moreKennametal 1910650 – Tungsten Carbide Straight Bore Nozzle, 5/16″ Bore Diameter
Fast View -
T137-4AP Nozzle, 1/4″ Bore
Read moreKennametal 2013740 – Tungsten Carbide Straight Bore Nozzle, 1/4″ Bore Diameter
Fast View -
T198-4 Nozzle,1/4″ Bore
Read moreKennametal 1919840 – Tungsten Carbide Straight Bore Flanged Nozzle, 1/4″ Bore Diameter
Fast View -
TC Nozzle No. 4, 1/4″ Bore
Read moreFast View -
TC Nozzle, 1/4″ Bore
Read moreFast View -
TC Nozzle, 3/16″ Bore
Read moreFast View -
TC WIN Nozzle Alum Jacket #6
Read moreKennametal 1912565 – Water Induction Nozzle, Tungsten Carbide, 3/8″ Bore Diameter
Fast View -
TC WIN Nozzle Alum Jacket #8
Read moreKennametal 1912585 – Water Induction Nozzle, Tungsten Carbide, 1/2″ Bore Diameter
Fast View -
Tear Off Lens – 50/PK
Read moreFast View -
Tee 1/4″ NPT Brass
Read moreFast View -
TeraValve XL TC 1-1/4″ Piping
Read moreAxxiom 2130-007 – TeraValve XL 1-1/4″
The new TeraValve abrasive metering valve is revolutionary in its ability to provide high performance, pressure hold blasting at a cost effective price point. The TeraValve is diaphragm activated, simplifying overall operation and maintenance. The new Schmidt extended life (XL™) technology is incorporated for durability and long life, even when the valve is used with harsh abrasives. The compact size fits easily onto low clearance blast pots or blast cabinets without modification, making it easy to convert automatic blowdown pots to a more efficient and productive pressure hold system.
Axxiom TeraValve Brochure
https://www.axxiommfg.com/library/documents/TeraValveXL_TVIIXL_202109.pdf
Fast View -
TeraValve XL, Repair Kit
Read moreFast View -
Thompson Valve 1-1/4″
Read moreFast View -
Thompson Valve Classic Repair Kit w/ Piston and Seals
Read moreAxxiom 2149-000-99 – Thompson Valve Replacement Parts Kit, TC w/ Sleeve
Fast View -
Thompson Valve II, T.C. 1-1/4″
Read moreAxxiom 2152-007 – Thompson Valve II 1-1/4″, Tungsten Carbide
The TVII™ is a normally closed, self-sealing abrasive metering valve. It’s fail safe design shuts off abrasive flow to the nozzle and seals the tank at the same instant. No other valve offers the smooth, fast and reliable performance of the TVII or its durability and ease of maintenance.
Axxiom Product Brochure
https://www.axxiommfg.com/library/documents/TVII_TVIIXL_202109.pdf
Fast View -
Thompson Valve w/ Tungsten Sleeve 1-1/4″
Read moreAxxiom 2149-007 – Thompson Valve 1-1/4″
The Thompson Valve is ideal for multiple outlet use and is easily adaptable to most existing blasting systems. It is engineered to allow precise metering of all types of abrasive media and can be modified for special applications.
Axxiom Thompson Valve Brochure
https://www.axxiommfg.com/library/documents/TVII_TVIIXL_202109.pdf
Fast View -
Thrd Coupling STD NPS Aluminum 2″ (S/B-5P-32)
Read moreFast View -
TJP-4 Nozzle
Read moreFast View -
TL2-2 Nozzle, 1/8″ Bore
Read moreKennametal 1730012 – Tungsten Carbide Straight Bore Cone Nozzle, 1/8″ Bore Diameter
Fast View -
TLVE-3 Nozzle, 3/16″ Bore
Read moreKennametal 1915630 – Tungsten Carbide Long Venturi Nozzle, 3/16″ Bore Diameter
Fast View -
TLVE-3P Nozzle, 3/16″ Bore
Read moreKennametal 2015630 – Tungsten Carbide Long Venturi Nozzle, 3/16″ Bore Diameter
Fast View -
TLVE-4P Nozzle, 1/4″ Bore
Read moreKennametal 2015640 – Tungsten Carbide Long Venturi Nozzle, 1/4″ Bore Diameter
Fast View -
TLVE-5P Nozzle, 5/16″ Bore
Read moreKennametal 2015650 – Tungsten Carbide Long Venturi Nozzle, 5/16″ Bore Diameter
Fast View -
TLVE-6P Nozzle, 3/8″ Bore
Read moreKennametal 2015660 – Tungsten Carbide Long Venturi Nozzle, 3/8″ Bore Diameter
Fast View -
TLVE-7P Nozzle, 7/16″ Bore
Read moreKennametal 2015670 – Tungsten Carbide Long Venturi Nozzle, 7/16″ Bore Diameter
Fast View -
TLVE-8P Nozzle, 1/2″ Bore
Read moreKennametal 2015680 – Tungsten Carbide Long Venturi Nozzle, 1/2″ Bore Diameter
Fast View -
TMP-4 Nozzle, 1/4″ Orifice
Read moreFast View -
TMP-6 Nozzle, 3/8″ Orifice
Read moreFast View -
Toe Board 9′
Read moreFast View -
Top Liner
Read moreFast View -
Top Potentiometer
Read moreFast View -
Top, Metering Valve
Read moreFast View -
TPM-3 Nozzle
Read moreFast View -
Tri-Clamp, O-Ring, 1-1/2″
Read moreFast View -
TSP-4 Nozzle
Read moreClemco 23514 – Tungsten Carbide Lined Rubber Jacketed Long Venturi Nozzle, 1/4″ Orifice, Fine 1-1/4″ Thread
Fast View -
TSP-5 Nozzle
Read moreClemco 23515 – Tungsten Carbide Lined Rubber Jacketed Long Venturi Nozzle, 5/16″ Orifice, Fine 1-1/4″ Thread
Fast View -
TSP-6 Nozzle
Read moreClemco 23516 – Tungsten Carbide Lined Rubber Jacketed Long Venturi Nozzle, 3/8″ Orifice, Fine 1-1/4″ Thread
Fast View -
TSP-8 Nozzle
Read moreClemco 23518 – Tungsten Carbide Lined Rubber Jacketed Long Venturi Nozzle, 1/2″ Orifice, Fine 1-1/4″ Thread
Fast View -
Tungsten Carb Nozzle 1/4″ 12 CFM
Read moreFast View -
Tungsten Nozzle, 1/4″ Bore, 1/2 OD 1-9/16 Length
Read moreFast View -
TV Bump Ring
Read moreFast View -
TV Insert
Read moreFast View -
TV Insert O-Ring
Read moreFast View -
TV Pipe Nipple 1-1/4″ X 8″
Read more#14 SHOWN IN FIGURE
Axxiom 2149-007-15 – Thompson Valve Pipe Nipple, 1-1/4″ mnpt x 1-1/4″ mnpt
Fast View -
TV Piston Seal
Read moreFast View -
TV Plunger
Read moreFast View -
TV Seat
Read moreFast View -
TV Sleeve, Tungsten Carbide
Read more#18 SHOWN IN FIGURE
Axxiom 2149-000-13 – Thompson Valve Tungsten Carbide Sleeve
Fast View -
TVII Seal Kit
Read moreFast View -
TVII Seat
Read moreFast View -
TVII Sleeve Tungsten Carbide
Read more#25 SHOWN IN FIGURE
Axxiom 2152-000-13 – Thompson Valve II Replacement Sleeve
Fast View -
TVII Spring
Read moreFast View -
Tychem – QC Hood w/ Inner Bib – No Suspension
Read moreThe Bullard 20TIC hood can be used with airline systems or Powered Air Purifying Respirator (PAPR) blower assemblies.
Fast View -
Tychem QC Hood
Read moreFast View -
Tychem QC Hood w/ Inner Bib
Read moreFast View -
Tyvek Painter’s Coverall – SZ LG
Read moreTrimaco 14122 – Tyvek Painters Heavy-Duty Coveralls, White, Size Large, No Elastic, Disposable
Fast View -
U Scraper
Read moreFast View -
Umbrella, 4″ Pop-Up Valve
Read moreFast View -
Union End Ball Valve
Read moreFast View -
UNIV 1-1/2″ Female End
Read moreFast View -
UNIV 1-1/2″ Hose End
Read moreFast View -
UNIV 1-1/4″ Female End
Read moreFast View -
UNIV 1-1/4″ Hose End
Read moreFast View -
UNIV 1″ Female End
Read moreFast View -
UNIV 1″ Hose End
Read moreFast View -
UNIV 1″ Male End
Read moreFast View -
UNIV 1/2″ Female End
Read moreFast View -
UNIV 1/2″ Hose End
Read moreFast View -
UNIV 1/2″ Male End
Read moreFast View -
UNIV 1/4″ Female End
Read moreFast View -
UNIV 1/4″ Male End
Read moreFast View -
UNIV 2-Lug Washer
Read moreFast View -
UNIV 2″ Female End
Read moreFast View -
UNIV 2″ Hose End
Read moreFast View -
UNIV 3/4″ Female End
Read moreFast View -
UNIV 3/4″ Hose End
Read moreFast View -
UNIV 3/4″ Male End
Read moreFast View -
UNIV 3/8″ Female End
Read moreFast View -
UNIV 3/8″ Hose End
Read moreFast View -
UNIV 3/8″ Male End
Read moreFast View -
Universal Blasting Station
Read moreFast View -
Urethane Wear Sleeve for AQV
Read more#6 SHOWN IN FIGURE
Clemco 27521 – Auto Quantum Actuator Wear Sleeve, Urethane
Fast View -
V20 Industrial Interchange Hose
Read moreBullard airline hose including 1/4″ quick-disconnect and 3/8″ hose to 3/8″ pipe fitting. Durable 1/2″ ID rubber hose with 1/2″ industrial interchange quick-disconnect fittings.
Fast View -
V20 Industrial Interchange Hose – 100′
Read moreBullard airline hose including 1/4″ quick-disconnect and 3/8″ hose to 3/8″ pipe fitting. Durable 1/2″ ID rubber hose with 1/2″ industrial interchange quick-disconnect fittings.
Fast View -
Valve Body, 1-1/2″ Inlet
Read moreFast View -
Valve Body, 1″ Outlet
Read moreFast View -
Valve Cap, 1/2″ Outlet
Read moreFast View -
Valve Guide, Pop-Up, 1″ x 6″
Read moreFast View -
Valve Plug Washer, 1-1/2″ Inlet
Read moreFast View -
Valve Plug, 1-1/2″ Inlet Valve
Read more#10 SHOWN IN FIGURE
Clemco 01999 – 1-1/2″ Inlet Valve Replacement Valve Plug
Fast View -
Valve Plug, 1″ Inlet
Read moreFast View -
Valve Plug, 1″ Outlet
Read moreFast View -
Valve, 1-1/4″ Ball w/ Handle
Read moreFast View -
Valve, 1″ Diaphragm Outlet
Read moreFast View -
Valve, 1″ Outlet
Read moreFast View -
Valve, 1″ Recova Inlet
Read moreFast View -
Valve, 3-Way, ACS, Manual, 1/8″
Read moreFast View -
Valve, 4-Way Air
Read moreFast View -
Valve, Abr Meter BNP
Read moreFast View -
Valve, Abr Mtrg, Quantum Auto Grit w/ Ftgs
Read moreFast View -
Valve, Exhaust MG-78
Read moreFast View -
Valve, Exhaust, MG-72
Read more#22 SHOWN IN FIGURE
Empire 290181 – MG-72 Automatic Exhaust Valve for 680 Remote Control System
Fast View -
Valve, New Style Pneumatic, Pilot
Read moreFast View -
Valve, Pressure Relief 1/4″
Read more#4 SHOWN IN FIGURE
Clemco 01909 – CPF20/80 Pressure Relief Valve, 1/4″ NPT, 125 PSI
Fast View -
Valve, Pressure Relief Bullard Style
Read moreFast View -
Valve, Solenoid, 3-Way, N.C., 3/64″
Read moreFast View -
Valve,1/4″ Needle for Wet Blast System
Read more#13 SHOWN IN FIGURE
Clemco 05528 – Valve, 1/4″ NPT Needle for Water Pump Plumbing Schematic
Fast View -
Vent, 1/8″
Read moreFast View -
Venturi Blower Air Horn 44″
Read moreFast View -
Washer, 1″ Thrust
Read moreFast View -
Washer, Coupling 10/PK AHCW
Read moreFast View -
Washer, Rubber, 1-15/64″ x 3/4″ x 3/16″
Read moreFast View -
Washers NW-25, 10/PK
Read moreFast View -
Wear Sleeve
Read more#9 SHOWN IN FIGURE
Clemco 20495 – Sentinel Abrasive Metering Valve Replacement Wear Sleeve
Fast View -
Wetblast Attachment Complete
Read moreFast View -
Wetblast Injection Sleeve 1″ ID
Read moreFast View -
Wheel & Tire, 3 Bag Pot
Read moreFast View -
Wheel and Tire, 16″ x 4.00 Black
Read moreFast View -
Whipcheck, 1/4″ x 38″
Read moreFast View -
Whipcheck, 1/8″ x 20″
Read moreFast View -
Window Gasket Seal
Read moreFast View -
Wing Nut, 5/16″
Read moreFast View -
X-Large/XX-Large Cooling Vest
Read moreFast View -
XL Performance #7
Read moreKennametal 3787286 – XL Performance BP200 SiAION Blast Nozzle, 7/16″ Bore Diameter
Fast View -
XL Performance Nozzle #4
Read moreKennametal SN159-4XL12 – XL Performance BP200 SiAION Nozzle, 1/4″ Bore Diameter
Fast View -
XL Performance Nozzle #5
Read moreKennametal SN159-5XL12 – XL Performance BP200 SiAION Nozzle, 5/16″ Bore Diameter
Fast View -
XL Performance Nozzle #6
Read moreKennametal SN159-6XL12 – XL Performance BP200 SiAION Nozzle, 3/8″ Bore Diameter
Fast View -
XL Performance Nozzle #7
Read moreKennametal SN159-7XL12 – XL Performance BP200 SiAION Nozzle, 7/16″ Bore Diameter
Fast View -
XL Performance Nozzle #7
Read moreKennametal SN159-7XL12 – XL Performance BP200 SiAION Nozzle, 7/16″ Bore Diameter
Fast View -
XL Performance Nozzle #8
Read moreKennametal SN159-8XL12 – XL Performance BP200 SiAION Nozzle, 1/2″ Bore Diameter
Fast View -
Z-Link Flip Respirator
Read moreThe RPB Safety respirator kit is packaged 1 per case. This item comes with the following: 711 Zytec FR Inch FR Belt, 03-519 Flow Tester, 03-855 Battery, 07-765-FR 2 Inch FR Belt, Safety, Head Harness, and Z PAPR Assembly.
Fast View
Loading... All products loaded