SCHMIDT
Showing 1–48 of 154 results
-
0.9 cu. ft. Blast Pot – Pneumatic, TeraValve
Read moreAxxiom 8023-010 – 0.9 cu. ft. Abrasive blast pot, portable blaster, 3/4″ TeraValve, pneumatic AAV 25′ blast hose
Fast View -
0.9 cu. ft. Blast Pot – Pneumatic, TVII
Read moreAxxiom 8020-010 – 0.9 cu. ft. Abrasive blast pot, portable blaster, Thompson Valve II 3/4″, pneumatic controls, AAV 25′ blast hose
Fast View -
0.9 cu. ft. Mulit-Media Blaster
Read moreFast View -
1.5 cu. ft. Blast Pot – Electric, Tera
Read moreAxxiom 0132-636-01 – 1.5 cu. ft. Abrasive Blast Pot, Electric Controls w/ Tera Valve 1″
Fast View -
1.5 cu. ft. Sandblast Pot Package
Read more1.5 cu. ft. portable blaster, 150 psi (10.3 bar) rated vessel with 90˚ cone bottom head, with pneumatic remote controls, ComboValve®, MV3 w/ 1″ piping, 55′ twinline control hose, G2 Deadman control and moisture separator (blast hose and nozzle not included).
Fast View -
10 cu. ft. Blast Pot – Pneumatic, TVII
Read moreAxxiom 0831-338-01U – 10 cu. ft. Abrasive blast pot, pneumatic controls, Thompson Valve II TC 1-1/2″ piping
Fast View -
10 cu. ft. Blast Pot – Pneumatic, TVII, Dual Outlet
Read moreAxxiom 0841-338-XX – 10 cu. ft. Abrasive blast pot, pneumatic pot controls, Thompson Valve II TC (2), Dual outlet blaster
Fast View -
10 cu. ft. Stationary Blaster
Read moreThese Schmidt® blasting systems in 10 and 20 cu. ft. sizes are designed to meet contractor needs for larger projects or are common in industrial/blast room applications. Smaller than a bulk tank yet larger than the standard 6-bag pot, they can easily accommodate multiple outlets for increased productivity.
The 10 cu. ft. system is available in either MV 3®/ComboValve® configuration or as a pressure-hold system using the Thompson® Valve II controls.Fast View -
120 cu ft Bulk Pot
Read moreSchmidt® bulk blasters are designed to maximize the cost savings of volume production. They feature multi-outlet Thompson® Valve II/TeraValve™ XL™ controls that allow each operator independent control of their abrasive media flow.
Fast View -
160 cu ft Bulk Pot
Read moreSchmidt® bulk blasters are designed to maximize the cost savings of volume production. They feature multi-outlet Thompson® Valve II/TeraValve™ XL™ controls that allow each operator independent control of their abrasive media flow.
Fast View -
20 cu. ft. Stationary Blaster
Read moreThese Schmidt® blasting systems in 10 and 20 cu. ft. sizes are designed to meet contractor needs for larger projects or are common in industrial/blast room applications. Smaller than a bulk tank yet larger than the standard 6-bag pot, they can easily accommodate multiple outlets for increased productivity.
Fast View -
250 CFM Portable Dryer
Read more
AirPrep Systems are designed to cool and dry compressed air used in abrasive blasting equipment.
Fast View -
3.5 cu. ft. Blast Pot – Electric, MV
Read moreAxxiom 0332-127-11 – Portable 3.5 cu. ft. abrasive blast pot, Microvalve poly urethane sleeve 1-1/4” piping , combo valve blow down w/ moisture separator, including electric controls
Fast View -
3.5 cu. ft. Sandblast Pot Package
Read more3.5 cu. ft. portable blaster with 1-1/4″ piping, 150 psi (10.3 bar) rated vessel with 90˚ cone bottom head, with pneumatic remote controls, ComboValve®, MV3, 55′ twinline control hose, G2 Deadman control and moisture separator (blast hose and nozzle not included).
Fast View -
3″ 1-FNPT 1-Welded Coupling Painted
Read moreAxxiom 2011-011P – Eductor Pump Muffler Assembly 3″ , Painted, 1-FNPT 1-Welded Coupling
Fast View -
4″ x 6″ Handway Gasket
Read moreFast View -
400 CFM Skid Mounted Dryer
Read moreAirPrep Systems are designed to cool and dry compressed air used in abrasive blasting equipment. Compressed air enters a pre-filter that removes contaminants and condensed moisture. The air then travels through a fan-cooled radiator, where it is cooled to cause moisture to condense. The cooled air and water droplets flow into a separator tank, where the air expands and causes further condensation. The spinning movement of the air stream separates out the condensed moisture. In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/dessicant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.
This Air Dryer requires 300lbs of Dessicant Tablets.
Fast View -
6.5 cu. ft. – Blast Pot, MV3
Read moreAxxiom 6001-061-01 – 6.5 cu. ft. Portable Blast Pot Package, Combo Valve, Pneumatic Controls, MV3 Valve w/ 1-1/2″ Piping
Fast View -
6.5 cu. ft. Blast and Recovery System
Read moreFast View -
6.5 cu. ft. Blast Pot – Electric, MV
Read more
Axxiom 0532-128-11 – Portable 6.5 cu. ft. abrasive blast pot, electric controls, Microvalve poly urethane 1-1/2” piping, combo valve blow down w/ moisture separator.
Fast View -
6.5 cu. ft. Blast Pot – Electric, TVII
Read moreAxxiom 0532-338-01UV – Portable Abrasive Blaster, 150 PSI, Thompson Valve II Tungsten Carbide (1)1-1/2″, 12VDC Electric Controls
Fast View -
6.5 cu. ft. Blast Pot – Pneumatic, TVII
Read moreAxxiom 0531-338-01UV – Portable Abrasive Blaster, 150 PSI, Thompson Valve II Tungsten Carbide (1)1-1/2″, Pneumatic Controls
Axxiom Brochure
https://www.axxiommfg.com/library/documents/SmallPots_202109.pdf
Fast View -
6.5 cu. ft. Dual Outlet Electric Amphiblast
Read moreThe AmphiBlast system is the industry’s most efficient and productive dual-purpose abrasive blaster. Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive and water flows to achieve optimal blasting performance, all while maintaining efficient use of grit and water. Switch between wet or dry blast, blowoff, and softwash™ without having to reset your air, abrasive or water, using a central, easy-to-use gauge console.
At the heart of the abrasive control system is the robust Schmidt Thompson® Valve II, used globally for nearly two decades and capable of metering a wide range of coarse or fine abrasives in the AmphiBlast system. Dry blasting with the AmphiBlast features the same productivity gains and safety advantages found only in Schmidt systems. When wet blasting, operators can set and immediately see any change in water flow by using the gauge readout. This allows the operator to dial in and consistently repeat the water flow for minimal water consumption, maximum productivity, minimum abrasive use, or any other preference.
Fast View -
6.5 P-RCS/PNEU TVII TC
Read moreFast View -
6.5CF Blaster w/ 400 CFM Aftercooler
Read more
Schmidt 6.5 cu. ft. blast pot integrated with a 400 CFM Aftercooler system.
Fast View -
6″ Skirted Pop Up Gasket
Read moreFast View -
750 CFM Skid Mounted Dryer
Read moreAirPrep Systems are designed to cool and dry compressed air used in abrasive blasting equipment. Compressed air enters a pre-filter that removes contaminants and condensed moisture. The air then travels through a fan-cooled radiator, where it is cooled to cause moisture to condense. The cooled air and water droplets flow into a separator tank, where the air expands and causes further condensation. The spinning movement of the air stream separates out the condensed moisture. In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/dessicant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.
This Air Dryer requires 450lbs of Dessicant Tablets.
Fast View -
Air Motor 250/400/750 Radiator w/ Drain Holes
Read moreFast View -
Air Valve Repair Kit 1-1/2″ & 2″ High Flow
Read moreAxxiom 2123-009-99 – Auto Air Valve Replacement Kit 1-1/2″(high flow) & 2″
Fast View -
Amphiblast 3.5 cu. ft Lite Sys – 1-1/4″ Teravalve TC 12VDC mt
Read moreThe versatile AmphiBlast™ Lite 3.5 is an easy-to-use abrasive blasting system that packs heavyweight performance in a compact package. This unit can come with or without a water tank.
Fast View -
Amphiblast 3.5CF 15 Gallon Water Tank Kit
Read moreWATER TANK ONLY
Fifteen gallon water tank connecting to the 3.5 cu. ft. Axxiom Amphiblast.
Fast View -
Amphiblast, 1.5 CF Mini System (1) 1″ Tera Valve TC Elec 12 VDC w/ Water Tank Only
Read moreThe Mini AmphiBlast provides low cost and high productivity all in one unit. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™. The Mini AmphiBlast comes standard with an on-board water tank.
Fast View -
Amphiblast, 1.5 CF Mini System (1) 1″ Teravalve TC Elec 12VDC
Read moreThe Mini AmphiBlast provides low cost and high productivity all in one unit, with dual function wet/dry blasting. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.
The Mini AmphiBlast comes in two options, standard and with an on-board water tank.
Fast View -
Amphiblast, 1.5 P-RCS/ PNEU Teravalve TC (1) 1″ Man BD 150 psi
Read moreThe compact and light design of the The Mini AmphiBlast™ 1.5 allows for simple maneuvering into job sites or locations not normally accessible by larger pots.
The Amphiblast 8231-014-20 is a 1.5 cu. ft. unit that does not include the water tank.
Fast View -
Amphiblast, 1.5 P-RCS/ PNEU Teravalve TC (1) 1″ Man BD 150 PSI Water Tank Dolly
Read moreThe Mini AmphiBlast provides low cost and high productivity all in one unit. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.
Fast View -
Auto Air Valve 1-1/4″ NPT
Read moreFast View -
Auto Air Valve Diaphram
Read moreFast View -
Auto Air Valve, N/C 1″
Read moreFast View -
Ball Valve 1″ Full Port
Read moreFast View -
Blast Nozzle No. 5
Read moreFast View -
Blast/Aftercooler w/Electric Deadman
Read moreFast View -
Blaster Pkg 6.5 Remote w/ Loadskid
Read more6.5 cu. ft. portable blaster, 150 psi (10.3 bar) rated vessel with 90˚ cone bottom head, with pneumatic remote controls, ComboValve, VBSII System, MV3, 55′ twinline control hose, G2 Deadman control, and moisture separator, 50′ blast hose assembly, nozzle and a NIOSH approved type CE respirator with 50′ air supply hose kit and an airline filter.
Fast View -
Blowdown Hose Assy 3/4″ x 18″
Read moreFast View -
BRS 3.5 Collector Door
Read moreFast View -
BRS 3.5 Collector Head
Read moreFast View -
BRS 3.5 Cyclone Door
Read moreFast View -
BRS Dry-Filter 10″ Paper Media
Read moreFast View -
BRS Model 6.5 Package PBPV 12 VDC Portable
Read moreThe Schmidt® BRS can blast and vacuum simultaneously, effectively eliminating offensive dust clouds, poor visibility and costly cleanup. It can also perform either function independently. The portable system is ideally suited for jobs where traditional open-air blasting is prohibited, or is not possible or practical.
Fast View
Loading... All products loaded