Blast

Showing 193–240 of 1412 results

• 

  6.5 cu. ft. Blast Pot – Pneumatic, TVII

  Blast, Schmidt Small Pots, Small Pots
  Read more

  

  6.5 cu. ft. Blast Pot – Pneumatic, TVII

  Axxiom 0531-338-01UV – Portable Abrasive Blaster, 150 PSI, Thompson Valve II Tungsten Carbide (1)1-1/2″, Pneumatic Controls

  Axxiom Brochure

  https://www.axxiommfg.com/library/documents/SmallPots_202109.pdf
  Fast View
• 

  6.5 cu. ft. Dual Outlet Electric Amphiblast

  Amphiblast, Blast, SCHMIDT, Wetblast
  Read more

  

  6.5 cu. ft. Dual Outlet Electric Amphiblast

  The AmphiBlast system is the industry’s most efficient and productive dual-purpose abrasive blaster. Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive and water flows to achieve optimal blasting performance, all while maintaining efficient use of grit and water. Switch between wet or dry blast, blowoff, and softwash™ without having to reset your air, abrasive or water, using a central, easy-to-use gauge console.

  At the heart of the abrasive control system is the robust Schmidt Thompson® Valve II, used globally for nearly two decades and capable of metering a wide range of coarse or fine abrasives in the AmphiBlast system. Dry blasting with the AmphiBlast features the same productivity gains and safety advantages found only in Schmidt systems. When wet blasting, operators can set and immediately see any change in water flow by using the gauge readout. This allows the operator to dial in and consistently repeat the water flow for minimal water consumption, maximum productivity, minimum abrasive use, or any other preference.
  Fast View
• 

  6.5 P-RCS/PNEU TVII TC

  SCHMIDT, Schmidt Pots, Small Pots, Specialty Blasters
  Read more

  

  6.5 P-RCS/PNEU TVII TC
  Fast View
• 

  6.5CF Blaster w/ 400 CFM Aftercooler

  SCHMIDT, Schmidt Aftercoolers, Schmidt Specialty Blasters, Specialty Blasters
  Read more

  

  6.5CF Blaster w/ 400 CFM Aftercooler

  Schmidt 6.5 cu. ft. blast pot integrated with a 400 CFM Aftercooler system.
  Fast View
• 

  6′ Web Pass Through Anchor Sling w/ 2 D-Rings

  Blast, Blast Equipment, Blast Safety
  Read more

  

  6′ Web Pass Through Anchor Sling w/ 2 D-Rings

  Falltech 7372 – 6′ Web Pass-through Anchor Sling with 2 D-Rings and Wear Pad
  Fast View
• 

  6″ Flex Hose

  Blaster Parts, CLEMCO, Flex Hose
  Read more

  

  6″ Flex Hose

  Clemco 12452 – 6″ ID Flex Hose
  Fast View
• 

  6″ Skirted Pop Up Gasket

  Blaster Parts, SCHMIDT, Schmidt Parts
  Read more

  

  6″ Skirted Pop Up Gasket

  Axxiom 2100-007 – Pop-Up Gasket, Skirted 6″
  Fast View
• 

  6/12 Industrial Sand, 4000 lb

  Abrasives, Aggregates, Standard Sand
  Read more

  

  6/12 Industrial Sand, 4000 lb

  6/12 Industrial Sand is a product manufactured by Standard Sand. Please contact us at 888-331-7737 for pricing.

  Error: Contact form not found.
  Fast View
• 

  6/16, Paper Bag, Industrial Sand , 50 lb

  Abrasives, Aggregates, Blast, Standard Sand
  Read more

  

  6/16, Paper Bag, Industrial Sand , 50 lb

  6/16 Industrial Sand is a product manufactured by Standard Sand. Please contact us at 888-331-7737 for pricing.

  Error: Contact form not found.
  Fast View
• 

  6/20 Industrial Sand 50lb Bag

  Abrasives, Aggregates, Blast, Delicate Abrasives, Standard Sand
  Read more

  

  6/20 Industrial Sand 50lb Bag

  6/20 Industrial Sand is a product manufactured by Standard Sand.
  Fast View
• 

  60″ Wide x 60″ Deep x 53″ High, 900 Reclaim & D20 DC

  Blast Cabinet Replacement Parts, Blast Cabinets and Equipment, Blast Equipment, Blast It All
  Read more

  

  60″ Wide x 60″ Deep x 53″ High, 900 Reclaim & D20 DC
  Fast View
• 

  600 CFM Reclaimer

  Blast Cabinets and Equipment, CLEMCO, Clemco Specialty Blasters
  Read more

  

  600 CFM Reclaimer

  Clemco 12400 –  Reclaimer, Suction, 600 CFM
  Fast View
• 

  6045 Industrial Sand 50lb Bag

  Abrasives, Aggregates, Blast, Delicate Abrasives, Standard Sand
  Read more

  

  6045 Industrial Sand 50lb Bag

  6045 Industrial Sand is a product manufactured by Standard Sand.
  Fast View
• 

  60F, Paper Bag, Industrial Sand, 50 lb

  Abrasives, Aggregates, Blast, Delicate Abrasives, Standard Sand
  Read more

  

  60F, Paper Bag, Industrial Sand, 50 lb

  60F Industrial Sand is a product manufactured by Standard Sand.
  Fast View
• 

  6885PC1B10 Faceshield Cover 10/PK

  3M, Blast Safety, Paint Safety
  Read more

  

  6885PC1B10 Faceshield Cover 10/PK

  3M 38692 – Lens Cover for 6000 Series
  Fast View
• 

  6LED Blast Lgt, Poly Wrap Alum, No-Air, 100ft Cable, Power Box & Cord Plug Includes 3112HC-LED Stanc

  Blast, Blast Equipment, Blast Safety, Western Technology
  Read more

  

  6LED Blast Lgt, Poly Wrap Alum, No-Air, 100ft Cable, Power Box & Cord Plug Includes 3112HC-LED Stanc

  Western Technology 6 LED Blast Light, Polyurethane-Wrapped Aluminum, No-Air, 100Ft Cable, Power Box, and Cord Plug Includes 3112HC-LED Stanchion
  Fast View
• 

  7″ Flex Hose

  Blaster Parts, CLEMCO, Flex Hose, Hose
  Read more

  

  7″ Flex Hose

  Clemco 12469 – Hose, 7″ ID light lined per ft
  Fast View
• 

  70/200 Industrial Sand 3000lb Bag

  Aggregates, Blast, Delicate Abrasives
  Read more

  

  70/200 Industrial Sand 3000lb Bag

  70/200 Industrial Sand is a product manufactured by Standard Sand.
  Fast View
• 

  750 CFM Skid Mounted Dryer

  Air Dryers, Blast, SCHMIDT, Schmidt Air Dryers
  Read more

  

  750 CFM Skid Mounted Dryer

  AirPrep Systems are designed to cool and dry compressed air used in abrasive blasting equipment. Compressed air enters a pre-filter that removes contaminants and condensed moisture. The air then travels through a fan-cooled radiator, where it is cooled to cause moisture to condense. The cooled air and water droplets flow into a separator tank, where the air expands and causes further condensation. The spinning movement of the air stream separates out the condensed moisture. In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/dessicant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.

  This Air Dryer requires 450lbs of Dessicant Tablets.
  Fast View
• 

  8″ Flex Suction Hose

  Blaster Parts, CLEMCO, Hose
  Read more

  

  8″ Flex Suction Hose

  #1 SHOWN IN FIGURE

  Clemco 12470 – Light Lined Flex Hose, 8″ ID
  Fast View
• 

  8/20, Industrial Sand, Bulk

  Abrasives, Aggregates, Aggressive Abrasives, Blast, Standard Sand
  Read more

  

  8/20, Industrial Sand, Bulk

  8/20 Industrial Sand is a product manufactured by Standard Sand. Please contact us at 888-331-7737 for pricing.

  Error: Contact form not found.
  Fast View
• 

  8/30, Paper Bag, Industrial Sand, 50 lb

  Aggregates, Blast, Standard Sand
  Read more

  

  8/30, Paper Bag, Industrial Sand, 50 lb

  8/30 Industrial Sand is a product manufactured by Standard Sand. Please contact us at 888-331-7737 for pricing.

  Error: Contact form not found.
  Fast View
• 

  80/150 Extra Fine Clear Crushed Glass 2500lb Bag

  Abrasives, Aggregates, Aggressive Abrasives, Blast
  Read more

  

  80/150 Extra Fine Clear Crushed Glass 2500lb Bag

  Clear crushed glass is a clean, eco-friendly abrasive that is a recycled material.
  Fast View
• 

  80/150 Extra Fine Clear Crushed Glass 50lb Bag

  Abrasives, Aggregates, Aggressive Abrasives, Blast
  Read more

  

  80/150 Extra Fine Clear Crushed Glass 50lb Bag

  Clear crushed glass is a clean, eco-friendly abrasive that is a recycled material.
  Fast View
• 

  80/150 Extra Fine Multi Crushed Glass 50lb Bag

  Abrasives, Aggregates, Aggressive Abrasives, Blast, Harsco Environmental
  Read more

  

  80/150 Extra Fine Multi Crushed Glass 50lb Bag

  Multicolored crushed glass is an eco-friendly abrasive that is a recycled material.
  Fast View
• 

  8210 Plus N95 Particulate Respirator – 2

  3M, Blast Safety, Paint Safety, Respirators
  Read more

  

  8210 Plus N95 Particulate Respirator – 2

  8210 Plus N95 Performance Sanding and Fiberglass Disposable Respirator
  Fast View
• 

  8510338 3/8″ x 50′ 4000 PSI Hose

  Hose, Mi-T-M, Paint, Painting Sundries, Pressure Washer Parts, Pressure Washers
  Read more

  

  8510338 3/8″ x 50′ 4000 PSI Hose
  Fast View
• 

  9″ x 16″ Blotter Paper 10 Count

  Blast, Inspection, TQC Sheen
  Read more

  

  9″ x 16″ Blotter Paper 10 Count
  Fast View
• 

  90 Degree Nozzle, 5/16″ Bore, 1-1/4 Brass Thread

  Blast Nozzles, Blaster Parts, RPB Safety
  Read more

  

  90 Degree Nozzle, 5/16″ Bore, 1-1/4 Brass Thread
  Fast View
• 

  90 Degree Street Elbow, 1″

  Blast Equipment Replacement Parts, Blaster Parts, CLEMCO, Pipe/Hose Fitting
  Read more

  

  90 Degree Street Elbow, 1″

  #14 SHOWN IN FIGURE

  Clemco 01775 – 90 Degree Street Elbow, 1″

  Replacement elbow for 6 cu. ft. blast pot muffler 
  Fast View
• 

  Abrasive Trap Cap Lock Bar

  Blast, Blaster Parts, CLEMCO
  Read more

  

  Abrasive Trap Cap Lock Bar

  #5 SHOWN IN FIGURE

  Clemco 02016 – Abrasive Trap Lock Bar
  Fast View
• 

  Abrasive Trap Screen, 1″

  Blast Equipment Replacement Parts, Blaster Parts, CLEMCO
  Read more

  

  Abrasive Trap Screen, 1″

  #1 SHOWN IN FIGURE

  Clemco 02012 – Abrasive Trap Screen
  Fast View
• 

  Abrasive Trap, 1″

  Blast Equipment, Blaster Parts, CLEMCO
  Read more

  

  Abrasive Trap, 1″

  Clemco 02011 – Abrasive Trap, 1″
  Fast View
• 

  Acetate Inner Lens, 25/PK

  Blast Equipment Replacement Parts, Blast Safety, Bullard, Lenses
  Read more

  

  Acetate Inner Lens, 25/PK

  Bullard Acetate Inner Lens, .040″ Thick – 25/PK
  Fast View
• 

  ACV Air Control Valve w/ Belt

  Blast, Blaster Parts, CLEMCO
  Read more

  

  ACV Air Control Valve w/ Belt

  Clemco 100024 – Air Control Valve w/ Belt
  Fast View
• 

  Adapter, Brass, 1/4″ x 1/4″

  Blast Equipment Replacement Parts, Blaster Parts, Empire
  Read more

  

  Adapter, Brass, 1/4″ x 1/4″

  #5 SHOWN IN FIGURE

  Empire 520222 – Hose Adapter, 1/4″ x 1/4″
  Fast View
• 

  Adapter, NA-2

  Blast Equipment Replacement Parts, Blaster Parts, Empire
  Read more

  

  Adapter, NA-2

  Empire 504912 – Nozzle Adapter NA-2 Blast Hose Assembly
  Fast View
• 

  Adapter, NA-3 Nozzle

  Blast Equipment Replacement Parts, Blaster Parts, Empire
  Read more

  

  Adapter, NA-3 Nozzle

  #6 SHOWN IN FIGURE

  Empire 504942 – Ceramic Nozzle Adapter
  Fast View
• 

  Adapter, Nozzle (for P190 & BBO)

  Blast Equipment Replacement Parts, Blaster Parts, Empire
  Read more

  

  Adapter, Nozzle (for P190 & BBO)

  #2 SHOWN IN FIGURE

  Empire 504901 – P-190 Suction Blast Gun Nozzle Adapter
  Fast View
• 

  Adaptor, 1/8″ NPT w/ 1/16″ Orif

  Blast, Blast Equipment, Blast Equipment Replacement Parts, CLEMCO
  Read more

  

  Adaptor, 1/8″ NPT w/ 1/16″ Orif

  Clemco 01945- Adaptor, 1/8″ NPT with 1/16″ Orifice
  Fast View
• 

  Adaptor, Hose End

  Blast Equipment Replacement Parts, Blaster Parts, Forecast Sales
  Read more

  

  Adaptor, Hose End
  Fast View
• 

  Adhesive-Backed Mylar Lens Cover 25/PK

  Blast Equipment Replacement Parts, Blast Safety, Bullard, Lenses
  Read more

  

  Adhesive-Backed Mylar Lens Cover 25/PK
  Fast View
• 

  Adhesive-Edged Mylar Lens, 25/PK

  Blast Equipment Replacement Parts, Blast Safety, Bullard, Lenses
  Read more

  

  Adhesive-Edged Mylar Lens, 25/PK

  17″ X 6″ Large Clear Mylar Lens Cover w/ Adhesive Edging – 25/PACK
  Fast View
• 

  Adjustable Flow Control Valve

  Blast, Blast Safety, Blaster Parts, Bullard
  Read more

  

  Adjustable Flow Control Valve
  Fast View
• 

  Adjustable Head Support for Nova 3

  Blast Equipment, Blast Safety, Nova 3, RPB Safety
  Read more

  

  Adjustable Head Support for Nova 3

  RPB Safety head support band for Nova 3 helmet – RPB 07-900
  Fast View
• 

  Adjustable Headband Suspension

  Blast Equipment, Blast Safety, Bullard
  Read more

  

  Adjustable Headband Suspension

  Bullard Suspension Headband for CC20 Series Helmet
  Fast View
• 

  Adjustable Pinlock Headband Suspension

  Blast Equipment Replacement Parts, Blast Safety, Bullard
  Read more

  

  Adjustable Pinlock Headband Suspension

  Bullard Pinlock Suspension for 88VX Series
  Fast View
• 

  Adjusting Tool, BNP Gun

  Blast, Blast Cabinets and Equipment, CLEMCO
  Read more

  

  Adjusting Tool, BNP Gun

  #16 SHOWN IN FIGURE

  Clemco 19041 – BNP Gun Adjusting Tool
  Fast View

Loading...

All products loaded