SCHMIDT
Showing 25–48 of 154 results
-
6.5CF Blaster w/ 400 CFM Aftercooler
Read more
Schmidt 6.5 cu. ft. blast pot integrated with a 400 CFM Aftercooler system.
Fast View -
6″ Skirted Pop Up Gasket
Read moreFast View -
750 CFM Skid Mounted Dryer
Read moreAirPrep Systems are designed to cool and dry compressed air used in abrasive blasting equipment. Compressed air enters a pre-filter that removes contaminants and condensed moisture. The air then travels through a fan-cooled radiator, where it is cooled to cause moisture to condense. The cooled air and water droplets flow into a separator tank, where the air expands and causes further condensation. The spinning movement of the air stream separates out the condensed moisture. In the Air Dryer System (ADS), the air rises through a bed of marbles and into deliquescent/dessicant tablets inside the tank before the air exits the vessel. Approximately 50% of residual moisture is removed (after cooling). Removed moisture is collected in the bottom of the separator tank. An after-filter removes particulates that may have become airborne, then used in the abrasive blasting operation.
This Air Dryer requires 450lbs of Dessicant Tablets.
Fast View -
Air Motor 250/400/750 Radiator w/ Drain Holes
Read moreFast View -
Air Valve Repair Kit 1-1/2″ & 2″ High Flow
Read moreAxxiom 2123-009-99 – Auto Air Valve Replacement Kit 1-1/2″(high flow) & 2″
Fast View -
Amphiblast 3.5 cu. ft Lite Sys – 1-1/4″ Teravalve TC 12VDC mt
Read moreThe versatile AmphiBlast™ Lite 3.5 is an easy-to-use abrasive blasting system that packs heavyweight performance in a compact package. This unit can come with or without a water tank.
Fast View -
Amphiblast 3.5CF 15 Gallon Water Tank Kit
Read moreWATER TANK ONLY
Fifteen gallon water tank connecting to the 3.5 cu. ft. Axxiom Amphiblast.
Fast View -
Amphiblast, 1.5 CF Mini System (1) 1″ Tera Valve TC Elec 12 VDC w/ Water Tank Only
Read moreThe Mini AmphiBlast provides low cost and high productivity all in one unit. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™. The Mini AmphiBlast comes standard with an on-board water tank.
Fast View -
Amphiblast, 1.5 CF Mini System (1) 1″ Teravalve TC Elec 12VDC
Read moreThe Mini AmphiBlast provides low cost and high productivity all in one unit, with dual function wet/dry blasting. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.
The Mini AmphiBlast comes in two options, standard and with an on-board water tank.
Fast View -
Amphiblast, 1.5 P-RCS/ PNEU Teravalve TC (1) 1″ Man BD 150 psi
Read moreThe compact and light design of the The Mini AmphiBlast™ 1.5 allows for simple maneuvering into job sites or locations not normally accessible by larger pots.
The Amphiblast 8231-014-20 is a 1.5 cu. ft. unit that does not include the water tank.
Fast View -
Amphiblast, 1.5 P-RCS/ PNEU Teravalve TC (1) 1″ Man BD 150 PSI Water Tank Dolly
Read moreThe Mini AmphiBlast provides low cost and high productivity all in one unit. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.
Fast View -
Auto Air Valve 1-1/4″ NPT
Read moreFast View -
Auto Air Valve Diaphram
Read moreFast View -
Auto Air Valve, N/C 1″
Read moreFast View -
Ball Valve 1″ Full Port
Read moreFast View -
Blast Nozzle No. 5
Read moreFast View -
Blast/Aftercooler w/Electric Deadman
Read moreFast View -
Blaster Pkg 6.5 Remote w/ Loadskid
Read more6.5 cu. ft. portable blaster, 150 psi (10.3 bar) rated vessel with 90˚ cone bottom head, with pneumatic remote controls, ComboValve, VBSII System, MV3, 55′ twinline control hose, G2 Deadman control, and moisture separator, 50′ blast hose assembly, nozzle and a NIOSH approved type CE respirator with 50′ air supply hose kit and an airline filter.
Fast View -
Blowdown Hose Assy 3/4″ x 18″
Read moreFast View -
BRS 3.5 Collector Door
Read moreFast View -
BRS 3.5 Collector Head
Read moreFast View -
BRS 3.5 Cyclone Door
Read moreFast View -
BRS Dry-Filter 10″ Paper Media
Read moreFast View -
BRS Model 6.5 Package PBPV 12 VDC Portable
Read moreThe Schmidt® BRS can blast and vacuum simultaneously, effectively eliminating offensive dust clouds, poor visibility and costly cleanup. It can also perform either function independently. The portable system is ideally suited for jobs where traditional open-air blasting is prohibited, or is not possible or practical.
Fast View
Loading... All products loaded