Wetblast – Surface Prep Supply

Amphiblast, 1.5 CF Mini System (1) 1″ Teravalve TC Elec 12VDC

admin — Thu, 13 Aug 2020 22:51:37 +0000

The Mini AmphiBlast provides low cost and high productivity all in one unit, with dual function wet/dry blasting. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.

The Mini AmphiBlast comes in two options, standard and with an on-board water tank.

Amphiblast, 1.5 P-RCS/ PNEU Teravalve TC (1) 1″ Man BD 150 PSI Water Tank Dolly

admin — Thu, 13 Aug 2020 22:51:01 +0000

The Mini AmphiBlast provides low cost and high productivity all in one unit. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.

Amphiblast 3.5CF 15 Gallon Water Tank Kit

admin — Thu, 13 Aug 2020 22:47:25 +0000

WATER TANK ONLY Fifteen gallon water tank connecting to the 3.5 cu. ft. Axxiom Amphiblast.

6.5 cu. ft. Dual Outlet Electric Amphiblast

admin — Thu, 13 Aug 2020 22:44:51 +0000

The AmphiBlast system is the industry's most efficient and productive dual-purpose abrasive blaster. Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive and water flows to achieve optimal blasting performance, all while maintaining efficient use of grit and water. Switch between wet or dry blast, blowoff, and softwash™ without having to reset your air, abrasive or water, using a central, easy-to-use gauge console. At the heart of the abrasive control system is the robust Schmidt Thompson® Valve II, used globally for nearly two decades and capable of metering a wide range of coarse or fine abrasives in the AmphiBlast system. Dry blasting with the AmphiBlast features the same productivity gains and safety advantages found only in Schmidt systems. When wet blasting, operators can set and immediately see any change in water flow by using the gauge readout. This allows the operator to dial in and consistently repeat the water flow for minimal water consumption, maximum productivity, minimum abrasive use, or any other preference.

W/B Inject Sys, 2 op/1-1/4″/1″

admin — Thu, 13 Aug 2020 22:11:11 +0000

Two Operator Wetblast Injector Accessory Package for use with standard blast machines.

W/B Inject Sys, 1 op/cont/1″

admin — Thu, 13 Aug 2020 22:05:39 +0000

One Operator Wetblast Injector Accessory Package for use with standard blast machines.

Wet Injection System

admin — Thu, 13 Aug 2020 21:17:13 +0000

Wetblast Injector System – Converts a dry-blast machine into a high-performance wetblast system.

Wetblast Injection Sleeve 1″ ID

admin — Thu, 13 Aug 2020 04:55:35 +0000

1″ Clemco water injector sleeve for 1-1/4″ nozzle body.

Amphiblast 3.5 cu. ft Lite Sys – 1-1/4″ Teravalve TC 12VDC mt

admin — Thu, 13 Aug 2020 04:53:41 +0000

The versatile AmphiBlast™ Lite 3.5 is an easy-to-use abrasive blasting system that packs heavyweight performance in a compact package. This unit can come with or without a water tank.

Wetblast Attachment Complete

admin — Thu, 13 Aug 2020 04:33:49 +0000

Clemco WetBlast Attachment - Water Ring