Abrasive Blasters – Surface Prep Supply

6.5 cu. ft. Blast Pot – Electric, MV

admin — Wed, 15 Feb 2023 18:25:34 +0000

Axxiom 0532-128-11 – Portable 6.5 cubic foot abrasive blast pot, electric controls, Microvalve poly urethane 1-1/2” piping, combo valve blow down with moisture separator.

Power Gun H2O

admin — Thu, 13 Aug 2020 22:54:35 +0000

Amphiblast, 1.5 CF Mini System (1) 1″ Teravalve TC Elec 12VDC

admin — Thu, 13 Aug 2020 22:51:37 +0000

The Mini AmphiBlast provides low cost and high productivity all in one unit, with dual function wet/dry blasting. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.

The Mini AmphiBlast comes in two options, standard and with an on-board water tank.

Amphiblast, 1.5 P-RCS/ PNEU Teravalve TC (1) 1″ Man BD 150 PSI Water Tank Dolly

admin — Thu, 13 Aug 2020 22:51:01 +0000

The Mini AmphiBlast provides low cost and high productivity all in one unit. Available in electric and pneumatic modes, all units include an electric water pump, a simple control panel, and the power and reliability of the Schmidt Teravalve™ XL™.

Yard Torsion Trailer 16,000lb

admin — Thu, 13 Aug 2020 22:49:06 +0000

Schmidt Manufacturing torsion suspension yard 16,000 lb trailer.

Amphiblast 3.5CF 15 Gallon Water Tank Kit

admin — Thu, 13 Aug 2020 22:47:25 +0000

WATER TANK ONLY Fifteen gallon water tank connecting to the 3.5 cu. ft. Axxiom Amphiblast.

6.5 cu. ft. Dual Outlet Electric Amphiblast

admin — Thu, 13 Aug 2020 22:44:51 +0000

The AmphiBlast system is the industry's most efficient and productive dual-purpose abrasive blaster. Unlike other blast systems that mix abrasive and water inside the vessel, the AmphiBlast system injects water into the blast stream after the metering valve, using a patent-pending, user-friendly and uniquely precise water injection system. With this system, you can quickly and consistently control every aspect: fine-tune air, abrasive and water flows to achieve optimal blasting performance, all while maintaining efficient use of grit and water. Switch between wet or dry blast, blowoff, and softwash™ without having to reset your air, abrasive or water, using a central, easy-to-use gauge console. At the heart of the abrasive control system is the robust Schmidt Thompson® Valve II, used globally for nearly two decades and capable of metering a wide range of coarse or fine abrasives in the AmphiBlast system. Dry blasting with the AmphiBlast features the same productivity gains and safety advantages found only in Schmidt systems. When wet blasting, operators can set and immediately see any change in water flow by using the gauge readout. This allows the operator to dial in and consistently repeat the water flow for minimal water consumption, maximum productivity, minimum abrasive use, or any other preference.

Powergun w/ 30′ Air & Supply Hoses

admin — Thu, 13 Aug 2020 22:42:13 +0000

The Clemco Power GunTM is a suctionblast tool designed for dry abrasive blasting where the air supply is limited or the job is small. The tool is lightweight, compact and ideal where setting up a conventional pressure blast machine would be awkward or inconvenient. The Power GunTM can be used with all common media to clean or etch metal, clean masonry, etch glass, and other durable surfaces.

BRS Model 6.5 Package PBPV 12 VDC Portable

admin — Thu, 13 Aug 2020 22:32:25 +0000

The Schmidt® BRS can blast and vacuum simultaneously, effectively eliminating offensive dust clouds, poor visibility and costly cleanup. It can also perform either function independently. The portable system is ideally suited for jobs where traditional open-air blasting is prohibited, or is not possible or practical.

W/B Inject Sys, 2 op/1-1/4″/1″

admin — Thu, 13 Aug 2020 22:11:11 +0000

Two Operator Wetblast Injector Accessory Package for use with standard blast machines.